Python new.write() Examples

def runTest(self):
        test = self._dt_test
        old = sys.stdout
        new = StringIO()
        optionflags = self._dt_optionflags

        if not (optionflags & REPORTING_FLAGS):
            # The option flags don't include any reporting flags,
            # so add the default reporting flags
            optionflags |= _unittest_reportflags

        runner = DocTestRunner(optionflags=optionflags,
                               checker=self._dt_checker, verbose=False)

        try:
            runner.DIVIDER = "-"*70
            failures, tries = runner.run(
                test, out=new.write, clear_globs=False)
        finally:
            sys.stdout = old

        if failures:
            raise self.failureException(self.format_failure(new.getvalue())) 

def runTest(self):
        test = self._dt_test
        old = sys.stdout
        new = StringIO()
        optionflags = self._dt_optionflags

        if not (optionflags & REPORTING_FLAGS):
            # The option flags don't include any reporting flags,
            # so add the default reporting flags
            optionflags |= _unittest_reportflags

        runner = DocTestRunner(optionflags=optionflags,
                               checker=self._dt_checker, verbose=False)

        try:
            runner.DIVIDER = "-"*70
            failures, tries = runner.run(
                test, out=new.write, clear_globs=False)
        finally:
            sys.stdout = old

        if failures:
            raise self.failureException(self.format_failure(new.getvalue())) 

def runTest(self):
        test = self._dt_test
        old = sys.stdout
        new = StringIO()
        optionflags = self._dt_optionflags

        if not (optionflags & REPORTING_FLAGS):
            # The option flags don't include any reporting flags,
            # so add the default reporting flags
            optionflags |= _unittest_reportflags

        runner = DocTestRunner(optionflags=optionflags,
                               checker=self._dt_checker, verbose=False)

        try:
            runner.DIVIDER = "-"*70
            failures, tries = runner.run(
                test, out=new.write, clear_globs=False)
        finally:
            sys.stdout = old

        if failures:
            raise self.failureException(self.format_failure(new.getvalue())) 

def runTest(self):
        test = self._dt_test
        old = sys.stdout
        new = StringIO()
        optionflags = self._dt_optionflags

        if not (optionflags & REPORTING_FLAGS):
            # The option flags don't include any reporting flags,
            # so add the default reporting flags
            optionflags |= _unittest_reportflags

        runner = DocTestRunner(optionflags=optionflags,
                               checker=self._dt_checker, verbose=False)

        try:
            runner.DIVIDER = "-"*70
            failures, tries = runner.run(
                test, out=new.write, clear_globs=False)
        finally:
            sys.stdout = old

        if failures:
            raise self.failureException(self.format_failure(new.getvalue())) 

def runTest(self):
        test = self._dt_test
        old = sys.stdout
        new = StringIO()
        optionflags = self._dt_optionflags

        if not (optionflags & REPORTING_FLAGS):
            # The option flags don't include any reporting flags,
            # so add the default reporting flags
            optionflags |= _unittest_reportflags

        runner = self._dt_runner(optionflags=optionflags,
                                 checker=self._dt_checker, verbose=False)

        try:
            runner.DIVIDER = "-"*70
            failures, tries = runner.run(
                test, out=new.write, clear_globs=False)
        finally:
            sys.stdout = old

        if failures:
            raise self.failureException(self.format_failure(new.getvalue())) 

def debug_script(src, pm=False, globs=None):
    "Debug a test script.  `src` is the script, as a string."
    import pdb

    # Note that tempfile.NameTemporaryFile() cannot be used.  As the
    # docs say, a file so created cannot be opened by name a second time
    # on modern Windows boxes, and execfile() needs to open it.
    srcfilename = tempfile.mktemp(".py", "doctestdebug")
    f = open(srcfilename, 'w')
    f.write(src)
    f.close()

    try:
        if globs:
            globs = globs.copy()
        else:
            globs = {}

        if pm:
            try:
                execfile(srcfilename, globs, globs)
            except:
                print sys.exc_info()[1]
                pdb.post_mortem(sys.exc_info()[2])
        else:
            # Note that %r is vital here.  '%s' instead can, e.g., cause
            # backslashes to get treated as metacharacters on Windows.
            pdb.run("execfile(%r)" % srcfilename, globs, globs)

    finally:
        os.remove(srcfilename) 

def debug_script(src, pm=False, globs=None):
    "Debug a test script.  `src` is the script, as a string."
    import pdb

    # Note that tempfile.NameTemporaryFile() cannot be used.  As the
    # docs say, a file so created cannot be opened by name a second time
    # on modern Windows boxes, and execfile() needs to open it.
    srcfilename = tempfile.mktemp(".py", "doctestdebug")
    f = open(srcfilename, 'w')
    f.write(src)
    f.close()

    try:
        if globs:
            globs = globs.copy()
        else:
            globs = {}

        if pm:
            try:
                execfile(srcfilename, globs, globs)
            except:
                print sys.exc_info()[1]
                pdb.post_mortem(sys.exc_info()[2])
        else:
            # Note that %r is vital here.  '%s' instead can, e.g., cause
            # backslashes to get treated as metacharacters on Windows.
            pdb.run("execfile(%r)" % srcfilename, globs, globs)

    finally:
        os.remove(srcfilename) 

def is_private(prefix, base):
    """prefix, base -> true iff name prefix + "." + base is "private".

    Prefix may be an empty string, and base does not contain a period.
    Prefix is ignored (although functions you write conforming to this
    protocol may make use of it).
    Return true iff base begins with an (at least one) underscore, but
    does not both begin and end with (at least) two underscores.
    """
    warnings.warn("is_private is deprecated; it wasn't useful; "
                  "examine DocTestFinder.find() lists instead",
                  DeprecationWarning, stacklevel=2)
    return base[:1] == "_" and not base[:2] == "__" == base[-2:] 

def debug_script(src, pm=False, globs=None):
    "Debug a test script.  `src` is the script, as a string."
    import pdb

    # Note that tempfile.NameTemporaryFile() cannot be used.  As the
    # docs say, a file so created cannot be opened by name a second time
    # on modern Windows boxes, and execfile() needs to open it.
    srcfilename = tempfile.mktemp(".py", "doctestdebug")
    f = open(srcfilename, 'w')
    f.write(src)
    f.close()

    try:
        if globs:
            globs = globs.copy()
        else:
            globs = {}

        if pm:
            try:
                execfile(srcfilename, globs, globs)
            except:
                print sys.exc_info()[1]
                pdb.post_mortem(sys.exc_info()[2])
        else:
            # Note that %r is vital here.  '%s' instead can, e.g., cause
            # backslashes to get treated as metacharacters on Windows.
            pdb.run("execfile(%r)" % srcfilename, globs, globs)

    finally:
        os.remove(srcfilename) 

def is_private(prefix, base):
    """prefix, base -> true iff name prefix + "." + base is "private".

    Prefix may be an empty string, and base does not contain a period.
    Prefix is ignored (although functions you write conforming to this
    protocol may make use of it).
    Return true iff base begins with an (at least one) underscore, but
    does not both begin and end with (at least) two underscores.
    """
    warnings.warn("is_private is deprecated; it wasn't useful; "
                  "examine DocTestFinder.find() lists instead",
                  DeprecationWarning, stacklevel=2)
    return base[:1] == "_" and not base[:2] == "__" == base[-2:] 

def is_private(prefix, base):
    """prefix, base -> true iff name prefix + "." + base is "private".

    Prefix may be an empty string, and base does not contain a period.
    Prefix is ignored (although functions you write conforming to this
    protocol may make use of it).
    Return true iff base begins with an (at least one) underscore, but
    does not both begin and end with (at least) two underscores.

    >>> is_private("a.b", "my_func")
    False
    >>> is_private("____", "_my_func")
    True
    >>> is_private("someclass", "__init__")
    False
    >>> is_private("sometypo", "__init_")
    True
    >>> is_private("x.y.z", "_")
    True
    >>> is_private("_x.y.z", "__")
    False
    >>> is_private("", "")  # senseless but consistent
    False
    """
    warnings.warn("is_private is deprecated; it wasn't useful; "
                  "examine DocTestFinder.find() lists instead",
                  DeprecationWarning, stacklevel=2)
    return base[:1] == "_" and not base[:2] == "__" == base[-2:] 

def debug_script(src, pm=False, globs=None):
    "Debug a test script.  `src` is the script, as a string."
    import pdb

    # Note that tempfile.NameTemporaryFile() cannot be used.  As the
    # docs say, a file so created cannot be opened by name a second time
    # on modern Windows boxes, and execfile() needs to open it.
    srcfilename = tempfile.mktemp(".py", "doctestdebug")
    f = open(srcfilename, 'w')
    f.write(src)
    f.close()

    try:
        if globs:
            globs = globs.copy()
        else:
            globs = {}

        if pm:
            try:
                execfile(srcfilename, globs, globs)
            except:
                print sys.exc_info()[1]
                pdb.post_mortem(sys.exc_info()[2])
        else:
            # Note that %r is vital here.  '%s' instead can, e.g., cause
            # backslashes to get treated as metacharacters on Windows.
            pdb.run("execfile(%r)" % srcfilename, globs, globs)

    finally:
        os.remove(srcfilename) 

def debug_script(src, pm=False, globs=None):
    "Debug a test script.  `src` is the script, as a string."
    import pdb

    # Note that tempfile.NameTemporaryFile() cannot be used.  As the
    # docs say, a file so created cannot be opened by name a second time
    # on modern Windows boxes, and execfile() needs to open it.
    srcfilename = tempfile.mktemp(".py", "doctestdebug")
    with open(srcfilename, 'w') as fp:
        fp.write(src)

    try:
        if globs:
            globs = globs.copy()
        else:
            globs = {}

        if pm:
            try:
                execfile(srcfilename, globs, globs)
            except:
                print(sys.exc_info()[1])
                pdb.post_mortem(sys.exc_info()[2])
        else:
            # Note that %r is vital here.  '%s' instead can, e.g., cause
            # backslashes to get treated as metacharacters on Windows.
            pdb.run("execfile(%r)" % srcfilename, globs, globs)

    finally:
        os.remove(srcfilename) 

def run(self, test, compileflags=None, out=None, clear_globs=True):
        """
        Run the examples in `test`, and display the results using the
        writer function `out`.

        The examples are run in the namespace `test.globs`.  If
        `clear_globs` is true (the default), then this namespace will
        be cleared after the test runs, to help with garbage
        collection.  If you would like to examine the namespace after
        the test completes, then use `clear_globs=False`.

        `compileflags` gives the set of flags that should be used by
        the Python compiler when running the examples.  If not
        specified, then it will default to the set of future-import
        flags that apply to `globs`.

        The output of each example is checked using
        `DocTestRunner.check_output`, and the results are formatted by
        the `DocTestRunner.report_*` methods.
        """
        self.test = test

        if compileflags is None:
            compileflags = _extract_future_flags(test.globs)

        save_stdout = sys.stdout
        if out is None:
            out = save_stdout.write
        sys.stdout = self._fakeout

        # Patch pdb.set_trace to restore sys.stdout during interactive
        # debugging (so it's not still redirected to self._fakeout).
        # Note that the interactive output will go to *our*
        # save_stdout, even if that's not the real sys.stdout; this
        # allows us to write test cases for the set_trace behavior.
        save_set_trace = pdb.set_trace
        self.debugger = _OutputRedirectingPdb(save_stdout)
        self.debugger.reset()
        pdb.set_trace = self.debugger.set_trace

        # Patch linecache.getlines, so we can see the example's source
        # when we're inside the debugger.
        self.save_linecache_getlines = linecache.getlines
        linecache.getlines = self.__patched_linecache_getlines

        try:
            return self.__run(test, compileflags, out)
        finally:
            sys.stdout = save_stdout
            pdb.set_trace = save_set_trace
            linecache.getlines = self.save_linecache_getlines
            if clear_globs:
                test.globs.clear()

    #/////////////////////////////////////////////////////////////////
    # Summarization
    #///////////////////////////////////////////////////////////////// 

def run(self, test, compileflags=None, out=None, clear_globs=True):
        """
        Run the examples in `test`, and display the results using the
        writer function `out`.

        The examples are run in the namespace `test.globs`.  If
        `clear_globs` is true (the default), then this namespace will
        be cleared after the test runs, to help with garbage
        collection.  If you would like to examine the namespace after
        the test completes, then use `clear_globs=False`.

        `compileflags` gives the set of flags that should be used by
        the Python compiler when running the examples.  If not
        specified, then it will default to the set of future-import
        flags that apply to `globs`.

        The output of each example is checked using
        `DocTestRunner.check_output`, and the results are formatted by
        the `DocTestRunner.report_*` methods.
        """
        self.test = test

        if compileflags is None:
            compileflags = _extract_future_flags(test.globs)

        save_stdout = sys.stdout
        if out is None:
            out = save_stdout.write
        sys.stdout = self._fakeout

        # Patch pdb.set_trace to restore sys.stdout during interactive
        # debugging (so it's not still redirected to self._fakeout).
        # Note that the interactive output will go to *our*
        # save_stdout, even if that's not the real sys.stdout; this
        # allows us to write test cases for the set_trace behavior.
        save_set_trace = pdb.set_trace
        self.debugger = _OutputRedirectingPdb(save_stdout)
        self.debugger.reset()
        pdb.set_trace = self.debugger.set_trace

        # Patch linecache.getlines, so we can see the example's source
        # when we're inside the debugger.
        self.save_linecache_getlines = linecache.getlines
        linecache.getlines = self.__patched_linecache_getlines

        try:
            return self.__run(test, compileflags, out)
        finally:
            sys.stdout = save_stdout
            pdb.set_trace = save_set_trace
            linecache.getlines = self.save_linecache_getlines
            if clear_globs:
                test.globs.clear()

    #/////////////////////////////////////////////////////////////////
    # Summarization
    #///////////////////////////////////////////////////////////////// 

def run(self, test, compileflags=None, out=None, clear_globs=True):
        """
        Run the examples in `test`, and display the results using the
        writer function `out`.

        The examples are run in the namespace `test.globs`.  If
        `clear_globs` is true (the default), then this namespace will
        be cleared after the test runs, to help with garbage
        collection.  If you would like to examine the namespace after
        the test completes, then use `clear_globs=False`.

        `compileflags` gives the set of flags that should be used by
        the Python compiler when running the examples.  If not
        specified, then it will default to the set of future-import
        flags that apply to `globs`.

        The output of each example is checked using
        `DocTestRunner.check_output`, and the results are formatted by
        the `DocTestRunner.report_*` methods.
        """
        self.test = test

        if compileflags is None:
            compileflags = _extract_future_flags(test.globs)

        save_stdout = sys.stdout
        if out is None:
            out = save_stdout.write
        sys.stdout = self._fakeout

        # Patch pdb.set_trace to restore sys.stdout during interactive
        # debugging (so it's not still redirected to self._fakeout).
        # Note that the interactive output will go to *our*
        # save_stdout, even if that's not the real sys.stdout; this
        # allows us to write test cases for the set_trace behavior.
        save_set_trace = pdb.set_trace
        self.debugger = _OutputRedirectingPdb(save_stdout)
        self.debugger.reset()
        pdb.set_trace = self.debugger.set_trace

        # Patch linecache.getlines, so we can see the example's source
        # when we're inside the debugger.
        self.save_linecache_getlines = linecache.getlines
        linecache.getlines = self.__patched_linecache_getlines

        try:
            return self.__run(test, compileflags, out)
        finally:
            sys.stdout = save_stdout
            pdb.set_trace = save_set_trace
            linecache.getlines = self.save_linecache_getlines
            if clear_globs:
                test.globs.clear()

    #/////////////////////////////////////////////////////////////////
    # Summarization
    #///////////////////////////////////////////////////////////////// 

def run(self, test, compileflags=None, out=None, clear_globs=True):
        """
        Run the examples in `test`, and display the results using the
        writer function `out`.

        The examples are run in the namespace `test.globs`.  If
        `clear_globs` is true (the default), then this namespace will
        be cleared after the test runs, to help with garbage
        collection.  If you would like to examine the namespace after
        the test completes, then use `clear_globs=False`.

        `compileflags` gives the set of flags that should be used by
        the Python compiler when running the examples.  If not
        specified, then it will default to the set of future-import
        flags that apply to `globs`.

        The output of each example is checked using
        `DocTestRunner.check_output`, and the results are formatted by
        the `DocTestRunner.report_*` methods.
        """
        self.test = test

        if compileflags is None:
            compileflags = _extract_future_flags(test.globs)

        save_stdout = sys.stdout
        if out is None:
            out = save_stdout.write
        sys.stdout = self._fakeout

        # Patch pdb.set_trace to restore sys.stdout during interactive
        # debugging (so it's not still redirected to self._fakeout).
        # Note that the interactive output will go to *our*
        # save_stdout, even if that's not the real sys.stdout; this
        # allows us to write test cases for the set_trace behavior.
        save_set_trace = pdb.set_trace
        self.debugger = _OutputRedirectingPdb(save_stdout)
        self.debugger.reset()
        pdb.set_trace = self.debugger.set_trace

        # Patch linecache.getlines, so we can see the example's source
        # when we're inside the debugger.
        self.save_linecache_getlines = linecache.getlines
        linecache.getlines = self.__patched_linecache_getlines

        try:
            return self.__run(test, compileflags, out)
        finally:
            sys.stdout = save_stdout
            pdb.set_trace = save_set_trace
            linecache.getlines = self.save_linecache_getlines
            if clear_globs:
                test.globs.clear()

    #/////////////////////////////////////////////////////////////////
    # Summarization
    #///////////////////////////////////////////////////////////////// 

def run(self, test, compileflags=None, out=None, clear_globs=True):
        """
        Run the examples in `test`, and display the results using the
        writer function `out`.

        The examples are run in the namespace `test.globs`.  If
        `clear_globs` is true (the default), then this namespace will
        be cleared after the test runs, to help with garbage
        collection.  If you would like to examine the namespace after
        the test completes, then use `clear_globs=False`.

        `compileflags` gives the set of flags that should be used by
        the Python compiler when running the examples.  If not
        specified, then it will default to the set of future-import
        flags that apply to `globs`.

        The output of each example is checked using
        `DocTestRunner.check_output`, and the results are formatted by
        the `DocTestRunner.report_*` methods.
        """
        self.test = test

        if compileflags is None:
            compileflags = _extract_future_flags(test.globs)

        save_stdout = sys.stdout
        if out is None:
            out = save_stdout.write
        sys.stdout = self._fakeout

        # Patch pdb.set_trace to restore sys.stdout during interactive
        # debugging (so it's not still redirected to self._fakeout).
        # Note that the interactive output will go to *our*
        # save_stdout, even if that's not the real sys.stdout; this
        # allows us to write test cases for the set_trace behavior.
        save_set_trace = pdb.set_trace
        self.debugger = _OutputRedirectingPdb(save_stdout)
        self.debugger.reset()
        pdb.set_trace = self.debugger.set_trace

        # Patch linecache.getlines, so we can see the example's source
        # when we're inside the debugger.
        self.save_linecache_getlines = linecache.getlines
        linecache.getlines = self.__patched_linecache_getlines

        try:
            return self.__run(test, compileflags, out)
        finally:
            sys.stdout = save_stdout
            pdb.set_trace = save_set_trace
            linecache.getlines = self.save_linecache_getlines
            if clear_globs:
                test.globs.clear()

    #/////////////////////////////////////////////////////////////////
    # Summarization
    #/////////////////////////////////////////////////////////////////