This tool came of the simple need to handle batch uploads of both image assets to collections but also thanks to the new table feature the possibility of batch uploading shapefiles into a folder. Though a lot of these tools including batch image uploader is part of my other project geeadd which also includes additional features to add to the python CLI, this tool was designed to be minimal so as to allow the user to simply query their quota, upload images or tables and also to query ongoing tasks and delete assets. I am hoping this tool with a simple objective proves useful to a few users of Google Earth Engine.
-If you find this tool useful, star and cite it as below
Samapriya Roy. (2020, April 21). samapriya/geeup: geeup: Simple CLI for Earth Engine
Uploads (Version 0.3.7). Zenodo. http://doi.org/10.5281/zenodo.3759392This assumes that you have native python & pip installed in your system, you can test this by going to the terminal (or windows command prompt) and trying
python and then pip list
geeup now only support Python v3.4 or higher from geeup version 0.3.3
This command line tool is dependent on functionality from GDAL For installing GDAL in Ubuntu
sudo add-apt-repository ppa:ubuntugis/ppa && sudo apt-get update
sudo apt-get install gdal-bin
sudo apt-get install python-gdalShapely and a few other libraries are notoriously difficult to install on windows machines so follow the steps mentioned here before installing porder. You can download and install shapely and other libraries from the Unofficial Wheel files from here download depending on the python version you have. Do this only once you have install GDAL. I would recommend the steps mentioned above to get the GDAL properly installed. However I am including instructions to using a precompiled version of GDAL similar to the other libraries on windows. You can test to see if you have gdal by simply running
gdalinfo
in your command prompt. If you get a read out and not an error message you are good to go. If you don't have gdal try Option 1,2 or 3 in that order and that will install gdal along with the other libraries
Starting from geeup v0.3.4 onwards:
Simply run geeup -h after installation. This should go fetch the extra libraries you need and install them. Once installation is complete, the porder help page will show up. This should save you from the few steps below.
If this does not work or you get an unexpected error try the following commands. You can also use these commands if you simply want to update these libraries.
pipwin refresh
pipwin install gdalFor Windows I also found this guide from UCLA
Also for Ubuntu Linux I saw that this is necessary before the install
sudo apt install libcurl4-openssl-dev libssl-dev
This also needs earthengine cli to be installed and authenticated on your system and earthengine to be callable in your command line or terminal
To install geeup: Simple CLI for Earth Engine Uploads you can install using two methods.
pip install geeup
or you can also try
git clone https://github.com/samapriya/geeup.git
cd geeup
python setup.py installFor Linux use sudo or try pip install geeup --user.
I recommend installation within a virtual environment. Find more information on creating virtual environments here.
As usual, to print help:
usage: geeup.py [-h]
{update,quota,zipshape,upload,selupload,seltabup,tasks,delete}
...
Simple Client for Earth Engine Uploads with Selenium Support
positional arguments:
{update,quota,zipshape,upload,selupload,seltabup,tasks,delete}
update Updates Selenium drivers for firefox
quota Print Earth Engine total quota and used quota
zipshape Zips all shapefiles and subsidary files into
individual zip files
getmeta Generates generalized metadata for all rasters in folder
upload Batch Asset Uploader using Selenium
seltabup Batch Table Uploader using Selenium.
selsetup Non headless setup for new google account, use if upload
throws errors
tasks Queries current task status
[completed,running,ready,failed,cancelled]
delete Deletes collection and all items inside. Supports
Unix-like wildcards.
optional arguments:
-h, --help show this help message and exit
To obtain help for specific functionality, simply call it with help switch, e.g.: geeup zipshape -h. If you didn't install geeup, then you can run it just by going to geeup directory and running python geeup.py [arguments go here]
The tool is designed to handle batch uploading of images and tables(shapefiles). While there are image collection where you can batch upload imagery, for vector or shapefiles you have to batch upload them to a folder.
This is a key step since all upload function depends on this step, so make sure you run this. This downloads selenium driver and places to your local directory for windows and Linux subsystems. This is the first step to use selenium supported upload.
geeup init
Just a simple tool to print your earth engine quota quickly.
usage: geeup quota [-h]
optional arguments:
-h, --help show this help message and exitSo here's how table upload in Google Earth Engine works, you can either upload the component files shp, shx, prj and dbf or you can zip these files together and upload it as a single file. The pros for this is that it reduces the overall size of the shapefile after zipping them along, this tool looks for the shp file and finds the subsidiary files and zips them ready for upload. It also helps when you have limited upload bandwidth. Cons you have to create a replicate structure of the file system, but it saves on bandwidth and auto-arranges your files so you don't have to look for each additional file.
usage: geeup zipshape [-h] --input INPUT --output OUTPUT
optional arguments:
-h, --help show this help message and exit
Required named arguments.:
--input INPUT Path to the input directory with all shape files
--output OUTPUT Destination folder Full path where shp, shx, prj and dbf
files if present in input will be zipped and storedThis script generates a generalized metadata using information parsed from gdalinfo and metadata properties. For now it generates metadata with image name, x and y dimension of images, the pixel resolution and the number of bands.
usage: geeup getmeta [-h] --input INPUT --metadata METADATA
optional arguments:
-h, --help show this help message and exit
Required named arguments.:
--input INPUT Path to the input directory with all raster files
--metadata METADATA Full path to export metadata.csv file
The script creates an Image Collection from GeoTIFFs in your local directory. By default, the image name in the collection is the same as the local directory name; with the optional parameter you can provide a different name.
usage: geeup upload [-h] --source SOURCE --dest DEST -m METADATA
[--nodata NODATA] [-u USER]
optional arguments:
-h, --help show this help message and exit
Required named arguments.:
--source SOURCE Path to the directory with images for upload.
--dest DEST Destination. Full path for upload to Google Earth
Engine, e.g. users/pinkiepie/myponycollection
-m METADATA, --metadata METADATA
Path to CSV with metadata.
-u USER, --user USER Google account name (gmail address).
Optional named arguments:
--nodata NODATA The value to burn into the raster as NoData (missing
data)This tool allows you to batch download tables/shapefiles to a folder. It uses a modified version of the image upload and a wrapper around the earthengine upload cli to achieve this while creating folders if they don't exist and reporting on assets and checking on uploads. This only requires a source, destination and your ee authenticated email address. This tool also uses selenium to upload the tables.
usage: geeup seltabup [-h] --source SOURCE --dest DEST [-u USER]
optional arguments:
-h, --help show this help message and exit
Required named arguments.:
--source SOURCE Path to the directory with zipped folder for upload.
--dest DEST Destination. Full path for upload to Google Earth
Engine, e.g. users/pinkiepie/myponycollection
-u USER, --user USER Google account name (gmail address).Once in a while the geckodriver requires manual input before signing into the google earth engine, this tool will allow you to interact with the initialization of Google Earth Engine code editor window. It allows the user to specify the account they want to use, and should only be needed once.
geeup selsetup
This script counts all currently running, ready, completed, failed and canceled tasks along with failed tasks. This tool is linked to your google earth engine account with which you initialized the earth engine client. This takes no argument.
usage: geeup tasks [-h]
optional arguments:
-h, --help show this help message and exitThe delete is recursive, meaning it will also delete all children assets: images, collections, and folders. Use with caution!
usage: geeup delete [-h] id
positional arguments:
id Full path to asset for deletion. Recursively removes all
folders, collections and images.
optional arguments:
-h, --help show this help message and exit