import wx
from Kernel import Module
_ = wx.GetTranslation
class CutProperty(wx.Frame, Module):
def __init__(self, *args, **kwds):
# begin wxGlade: CutProperty.__init__
kwds["style"] = kwds.get("style", 0) | wx.DEFAULT_FRAME_STYLE | wx.FRAME_TOOL_WINDOW | wx.STAY_ON_TOP
wx.Frame.__init__(self, *args, **kwds)
Module.__init__(self)
self.SetSize((305, 216))
self.spin_speed_set = wx.SpinCtrlDouble(self, wx.ID_ANY, "10.0", min=0.0, max=240.0)
self.spin_power_set = wx.SpinCtrlDouble(self, wx.ID_ANY, "1000.0", min=0.0, max=1000.0)
self.checkbox_custom_d_ratio = wx.CheckBox(self, wx.ID_ANY, _("Custom D-Ratio"))
self.spin_speed_dratio = wx.SpinCtrlDouble(self, wx.ID_ANY, "0.261", min=0.0, max=1.0)
self.checkbox_custom_accel = wx.CheckBox(self, wx.ID_ANY, _("Acceleration Override"))
self.slider_accel = wx.Slider(self, wx.ID_ANY, 1, 1, 4, style=wx.SL_AUTOTICKS | wx.SL_LABELS)
self.__set_properties()
self.__do_layout()
self.Bind(wx.EVT_SPINCTRLDOUBLE, self.on_spin_speed, self.spin_speed_set)
self.Bind(wx.EVT_TEXT_ENTER, self.on_spin_speed, self.spin_speed_set)
self.Bind(wx.EVT_TEXT, self.on_spin_speed, self.spin_speed_set)
self.Bind(wx.EVT_SPINCTRLDOUBLE, self.on_spin_power, self.spin_power_set)
self.Bind(wx.EVT_TEXT_ENTER, self.on_spin_power, self.spin_power_set)
self.Bind(wx.EVT_TEXT, self.on_spin_power, self.spin_power_set)
self.Bind(wx.EVT_CHECKBOX, self.on_check_custom_d_ratio, self.checkbox_custom_d_ratio)
self.Bind(wx.EVT_SPINCTRLDOUBLE, self.on_spin_speed_dratio, self.spin_speed_dratio)
self.Bind(wx.EVT_TEXT_ENTER, self.on_spin_speed_dratio, self.spin_speed_dratio)
self.Bind(wx.EVT_TEXT, self.on_spin_speed_dratio, self.spin_speed_dratio)
self.Bind(wx.EVT_CHECKBOX, self.on_check_custom_accel, self.checkbox_custom_accel)
self.Bind(wx.EVT_COMMAND_SCROLL, self.on_slider_accel, self.slider_accel)
self.operation = None
self.Bind(wx.EVT_CLOSE, self.on_close, self)
def set_operation(self, operation):
self.operation = operation
try:
if operation.speed is not None:
self.spin_speed_set.SetValue(operation.speed)
except AttributeError:
self.spin_speed_set.Enable(False)
try:
if operation.power is not None:
self.spin_power_set.SetValue(operation.power)
except AttributeError:
self.spin_power_set.Enable(False)
try:
if operation.dratio is not None:
self.spin_speed_dratio.SetValue(operation.dratio)
except AttributeError:
self.spin_speed_dratio.Enable(False)
self.checkbox_custom_d_ratio.Enable(False)
try:
if operation.dratio_custom is not None:
self.checkbox_custom_d_ratio.SetValue(operation.dratio_custom)
self.spin_speed_dratio.Enable(self.checkbox_custom_d_ratio.GetValue())
except AttributeError:
pass
try:
if operation.acceleration is not None:
self.slider_accel.SetValue(operation.acceleration)
except AttributeError:
self.slider_accel.Enable(False)
self.checkbox_custom_accel.Enable(False)
try:
if operation.acceleration_custom is not None:
self.checkbox_custom_accel.SetValue(operation.acceleration_custom)
self.slider_accel.Enable(self.checkbox_custom_accel.GetValue())
except AttributeError:
pass
return self
def initialize(self):
self.device.close('window', self.name)
self.Show()
def shutdown(self, channel):
self.Close()
def on_close(self, event):
self.device.remove('window', self.name)
event.Skip() # Call destroy.
def __set_properties(self):
# begin wxGlade: EngraveProperty.__set_properties
self.SetTitle(_("Cut Properties"))
self.spin_speed_set.SetMinSize((100, 23))
self.spin_speed_set.SetToolTip(_("Speed at which to perform the action in mm/s."))
self.spin_power_set.SetMinSize((100, 23))
self.spin_power_set.SetToolTip(_("1000 always on. 500 it's half power (fire every other step). This is software PPI control."))
self.checkbox_custom_d_ratio.SetToolTip(_("Enables the ability to modify the diagonal ratio."))
self.spin_speed_dratio.SetMinSize((100, 23))
self.spin_speed_dratio.SetToolTip(_("Diagonal ratio is the ratio of additional time needed to perform a diagonal step rather than an orthogonal step."))
self.spin_speed_dratio.Enable(False)
self.spin_speed_dratio.SetIncrement(0.01)
self.checkbox_custom_accel.SetToolTip(_("Enables the ability to modify the acceleration factor."))
self.slider_accel.SetToolTip(_("Acceleration Factor Override"))
# end wxGlade
def __do_layout(self):
# begin wxGlade: EngraveProperty.__do_layout
sizer_8 = wx.BoxSizer(wx.VERTICAL)
sizer_11 = wx.BoxSizer(wx.HORIZONTAL)
sizer_10 = wx.BoxSizer(wx.HORIZONTAL)
sizer_9 = wx.BoxSizer(wx.HORIZONTAL)
sizer_7 = wx.BoxSizer(wx.HORIZONTAL)
label_1 = wx.StaticText(self, wx.ID_ANY, _("Speed"))
sizer_7.Add(label_1, 0, 0, 0)
sizer_7.Add(self.spin_speed_set, 0, 0, 0)
label_2 = wx.StaticText(self, wx.ID_ANY, _("mm/s"))
sizer_7.Add(label_2, 0, 0, 0)
sizer_8.Add(sizer_7, 1, wx.EXPAND, 0)
label_3 = wx.StaticText(self, wx.ID_ANY, _("Power"))
sizer_9.Add(label_3, 0, 0, 0)
sizer_9.Add(self.spin_power_set, 0, 0, 0)
label_8 = wx.StaticText(self, wx.ID_ANY, _("ppi"))
sizer_9.Add(label_8, 0, 0, 0)
sizer_8.Add(sizer_9, 1, wx.EXPAND, 0)
sizer_10.Add(self.checkbox_custom_d_ratio, 1, 0, 0)
sizer_10.Add(self.spin_speed_dratio, 1, 0, 0)
sizer_8.Add(sizer_10, 1, wx.EXPAND, 0)
sizer_11.Add(self.checkbox_custom_accel, 1, 0, 0)
sizer_11.Add(self.slider_accel, 1, wx.EXPAND, 0)
sizer_8.Add(sizer_11, 1, wx.EXPAND, 0)
self.SetSizer(sizer_8)
self.Layout()
self.Centre()
# end wxGlade
def on_spin_speed(self, event): # wxGlade: ElementProperty.<event_handler>
self.operation.speed = self.spin_speed_set.GetValue()
self.device.device_root.cut_speed = self.operation.speed
self.device.signal('element_property_update', self.operation)
def on_spin_power(self, event):
self.operation.power = self.spin_power_set.GetValue()
self.device.device_root.cut_power = self.operation.power
self.device.signal('element_property_update', self.operation)
def on_spin_speed_dratio(self, event): # wxGlade: ElementProperty.<event_handler>
self.operation.dratio = self.spin_speed_dratio.GetValue()
self.device.device_root.cut_dratio = self.operation.dratio
self.device.signal('element_property_update', self.operation)
def on_slider_accel(self, event): # wxGlade: EngraveProperty.<event_handler>
self.operation.acceleration = self.slider_accel.GetValue()
self.device.device_root.cut_acceleration = self.operation.acceleration
self.device.signal('element_property_update', self.operation)
def on_check_custom_d_ratio(self, event):
on = self.checkbox_custom_d_ratio.GetValue()
self.spin_speed_dratio.Enable(on)
self.device.device_root.cut_dratio_custom = on
self.operation.dratio_custom = on
self.device.signal('element_property_update', self.operation)
def on_check_custom_accel(self, event):
on = self.checkbox_custom_accel.GetValue()
self.slider_accel.Enable(on)
self.device.device_root.cut_acceleration_custom = on
self.operation.acceleration_custom = on
self.device.signal('element_property_update', self.operation)
