wttr.in — the right way to check the weather!

wttr.in is a console-oriented weather forecast service that supports various information representation methods like terminal-oriented ANSI-sequences for console HTTP clients (curl, httpie, or wget), HTML for web browsers, or PNG for graphical viewers.

wttr.in uses wego for visualization and various data sources for weather forecast information.

You can see it running here: wttr.in.

Usage

You can access the service from a shell or from a Web browser like this:

$ curl wttr.in
Weather for City: Paris, France

     \   /     Clear
      .-.      10 – 11 °C  
   ― (   ) ―   ↑ 11 km/h  
      `-’      10 km  
     /   \     0.0 mm  

Here is an actual weather report for your location (it's live!):

Weather Report

(It's not your actual location - GitHub's CDN hides your real IP address with its own IP address, but it's still a live weather report in your language.)

Or in PowerShell:

Invoke-RestMethod http://wttr.in

Want to get the weather information for a specific location? You can add the desired location to the URL in your request like this:

$ curl wttr.in/London
$ curl wttr.in/Moscow
$ curl wttr.in/Salt+Lake+City

If you omit the location name, you will get the report for your current location based on your IP address.

Use 3-letter airport codes in order to get the weather information at a certain airport:

$ curl wttr.in/muc      # Weather for IATA: muc, Munich International Airport, Germany
$ curl wttr.in/ham      # Weather for IATA: ham, Hamburg Airport, Germany

Let's say you'd like to get the weather for a geographical location other than a town or city - maybe an attraction in a city, a mountain name, or some special location. Add the character ~ before the name to look up that special location name before the weather is then retrieved:

$ curl wttr.in/~Vostok+Station
$ curl wttr.in/~Eiffel+Tower
$ curl wttr.in/~Kilimanjaro

For these examples, you'll see a line below the weather forecast output that shows the geolocation results of looking up the location:

Location: Vostok Station, станция Восток, AAT, Antarctica [-78.4642714,106.8364678]
Location: Tour Eiffel, 5, Avenue Anatole France, Gros-Caillou, 7e, Paris, Île-de-France, 75007, France [48.8582602,2.29449905432]
Location: Kilimanjaro, Northern, Tanzania [-3.4762789,37.3872648]

You can also use IP-addresses (direct) or domain names (prefixed with @) to specify a location:

$ curl wttr.in/@github.com
$ curl wttr.in/@msu.ru

To get detailed information online, you can access the /:help page:

$ curl wttr.in/:help

Weather Units

By default the USCS units are used for the queries from the USA and the metric system for the rest of the world. You can override this behavior by adding ?u or ?m to a URL like this:

$ curl wttr.in/Amsterdam?u
$ curl wttr.in/Amsterdam?m

Supported output formats and views

wttr.in currently supports five output formats:

The ANSI and HTML formats are selected basing on the User-Agent string. The PNG format can be forced by adding .png to the end of the query:

$ wget wttr.in/Paris.png

You can use all of the options with the PNG-format like in an URL, but you have to separate them with _ instead of ? and &:

$ wget wttr.in/Paris_0tqp_lang=fr.png

Useful options for the PNG format:

Transparency is a useful feature when weather PNGs are used to add weather data to pictures:

$ convert source.jpg <( curl wttr.in/Oymyakon_tqp0.png ) -geometry +50+50 -composite target.jpg

In this example:

Picture with weather data

You can embed a special wttr.in widget, that displays the weather condition for the current or a selected location, into a HTML page using the wttr-switcher. That is how it looks like: wttr-switcher-example or on a real world web site: https://feuerwehr-eisolzried.de/.

Embedded wttr.in example at feuerwehr-eisolzried.de

One-line output

For one-line output format, specify additional URL parameter format:

$ curl wttr.in/Nuremberg?format=3
Nuremberg: 🌦 +11⁰C

Available preconfigured formats: 1, 2, 3, 4 and the custom format using the percent notation (see below).

You can specify multiple locations separated with : (for repeating queries):

$ curl wttr.in/Nuremberg:Hamburg:Berlin?format=3
Nuremberg: 🌦 +11⁰C

Or to process all this queries at once:

$ curl -s 'wttr.in/{Nuremberg,Hamburg,Berlin}?format=3'
Nuremberg: 🌦 +11⁰C
Hamburg: 🌦 +8⁰C
Berlin: 🌦 +8⁰C

To specify your own custom output format, use the special %-notation:

    c    Weather condition,
    C    Weather condition textual name,
    h    Humidity,
    t    Temperature (Actual),
    f    Temperature (Feels Like),
    w    Wind,
    l    Location,
    m    Moonphase 🌑🌒🌓🌔🌕🌖🌗🌘,
    M    Moonday,
    p    precipitation (mm),
    o    Probability of Precipitation,
    P    pressure (hPa),

    D    Dawn*,
    S    Sunrise*,
    z    Zenith*,
    s    Sunset*,
    d    Dusk*.

(*times are shown in the local timezone)

So, these two calls are the same:

    $ curl wttr.in/London?format=3
    London: ⛅️ +7⁰C
    $ curl wttr.in/London?format="%l:+%c+%t"
    London: ⛅️ +7⁰C

Keep in mind, that when using in tmux.conf, you have to escape % with %, i.e. write there %% instead of %.

In programs, that are querying the service automatically (such as tmux), it is better to use some reasonable update interval. In tmux, you can configure it with status-interval.

If several, : separated locations, are specified in the query, specify update period as an additional query parameter period=:

set -g status-interval 60
WEATHER='#(curl -s wttr.in/London:Stockholm:Moscow\?format\="%%l:+%%c%%20%%t%%60%%w&period=60")'
set -g status-right "$WEATHER ..."

wttr.in in tmux status bar

To see emojis in terminal, you need:

  1. Terminal support for emojis (was added to Cairo 1.15.8);
  2. Font with emojis support.

For the Emoji font, we recommend Noto Color Emoji, and a good alternative option would be the Emoji One font; both of them support all necessary emoji glyphs.

Font configuration:

$ cat ~/.config/fontconfig/fonts.conf
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE fontconfig SYSTEM "fonts.dtd">
<fontconfig>
  <alias>
    <family>serif</family>
    <prefer>
      <family>Noto Color Emoji</family>
    </prefer>
  </alias>
  <alias>
    <family>sans-serif</family>
    <prefer>
      <family>Noto Color Emoji</family>
    </prefer>
  </alias>
  <alias>
    <family>monospace</family>
    <prefer>
      <family>Noto Color Emoji</family>
    </prefer>
  </alias>
</fontconfig>

(to apply the configuration, run fc-cache -f -v)

Data-rich output format

In the experimental data-rich output format, that is available under the view code v2, a lot of additional weather and astronomical information is available:

  $ curl v2.wttr.in/München

or

  $ curl wttr.in/München?format=v2

or, if you prefer Nerd Fonts instead of Emoji, v2d (day) or v2n (night):

  $ curl v2d.wttr.in/München

data-reach output format

(The mode is experimental, and it has several limitations currently:

Currently, you need some tweaks for some terminals, to get the best possible visualization.

URXVT

Depending on your configuration you might be taking all steps, or only a few. URXVT currently doesn't support emoji related fonts, but we can get almost the same effect using Font-Symbola. So add to your .Xresources file the following line:

    xft:symbola:size=10:minspace=False

You can add it after your preferred font and it will only show up when required. Then, if you see or feel like you're having spacing issues, add this: URxvt.letterSpace: 0 For some reason URXVT sometimes stops deciding right the word spacing and we need to force it this way.

The result, should look like:

URXVT Emoji line

Different output formats

JSON output

The JSON format is a feature providing access to wttr.in data through an easy-to-parse format, without requiring the user to create a complex script to reinterpret wttr.in's graphical output.

To fetch information in JSON format, use the following syntax:

$ curl wttr.in/Detroit?format=j1

This will fetch information on the Detroit region in JSON format. The j1 format code is used to allow for the use of other layouts for the JSON output.

The result will look something like the following:

{
    "current_condition": [
        {
            "FeelsLikeC": "25",
            "FeelsLikeF": "76",
            "cloudcover": "100",
            "humidity": "76",
            "observation_time": "04:08 PM",
            "precipMM": "0.2",
            "pressure": "1019",
            "temp_C": "22",
            "temp_F": "72",
            "uvIndex": 5,
            "visibility": "16",
            "weatherCode": "122",
            "weatherDesc": [
            {
                "value": "Overcast"
            }
            ],
            "weatherIconUrl": [
            {
                "value": ""
            }
            ],
            "winddir16Point": "NNE",
            "winddirDegree": "20",
            "windspeedKmph": "7",
            "windspeedMiles": "4"
        }
    ],
...

Most of these values are self-explanatory, aside from weatherCode. The weatherCode is an enumeration which you can find at either the WorldWeatherOnline website or in the wttr.in source code.

Prometheus Metrics Output

The Prometheus Metrics format is a feature providing access to wttr.in data through an easy-to-parse format for monitoring systems, without requiring the user to create a complex script to reinterpret wttr.in's graphical output.

To fetch information in Prometheus format, use the following syntax:

$ curl wttr.in/Detroit?format=p1

This will fetch information on the Detroit region in Prometheus Metrics format. The p1 format code is used to allow for the use of other layouts for the Prometheus Metrics output.

A possible configuration for Prometheus could look like this:

    - job_name: 'wttr_in_detroit'
        static_configs:
            - targets: ['wttr.in']
        metrics_path: '/Detroit'
        params:
            format: ['p1']

The result will look something like the following:

# HELP temperature_feels_like_celsius Feels Like Temperature in Celsius
temperature_feels_like_celsius{forecast="current"} 7
# HELP temperature_feels_like_fahrenheit Feels Like Temperature in Fahrenheit
temperature_feels_like_fahrenheit{forecast="current"} 45
[truncated]

...

Moon phases

wttr.in can also be used to check the phase of the Moon. This example shows how to see the current Moon phase in the full-output mode:

$ curl wttr.in/Moon

Get the Moon phase for a particular date by adding @YYYY-MM-DD:

$ curl wttr.in/Moon@2016-12-25

The Moon phase information uses pyphoon as its backend.

To get the moon phase information in the online mode, use %m:

$ curl wttr.in/London?format=%m
🌖

Keep in mid that the Unicode representation of moonphases suffers 2 caveats:

See #247, #364 for the corresponding tracking issues, and pyphoon#1 for pyphoon. Any help is welcome.

Internationalization and localization

wttr.in supports multilingual locations names that can be specified in any language in the world (it may be surprising, but many locations in the world don't have an English name).

The query string should be specified in Unicode (hex-encoded or not). Spaces in the query string must be replaced with +:

$ curl wttr.in/станция+Восток
Weather report: станция Восток

               Overcast
      .--.     -65 – -47 °C
   .-(    ).   ↑ 23 km/h
  (___.__)__)  15 km
               0.0 mm

The language used for the output (except the location name) does not depend on the input language and it is either English (by default) or the preferred language of the browser (if the query was issued from a browser) that is specified in the query headers (Accept-Language).

The language can be set explicitly when using console clients by using command-line options like this:

curl -H "Accept-Language: fr" wttr.in
http GET wttr.in Accept-Language:ru

The preferred language can be forced using the lang option:

$ curl wttr.in/Berlin?lang=de

The third option is to choose the language using the DNS name used in the query:

$ curl de.wttr.in/Berlin

wttr.in is currently translated into 54 languages, and the number of supported languages is constantly growing.

See /:translation to learn more about the translation process, to see the list of supported languages and contributors, or to know how you can help to translate wttr.in in your language.

Queries to wttr.in in various languages

Windows Users

There are currently two Windows related issues that prevent the examples found on this page from working exactly as expected out of the box. Until Microsoft fixes the issues, there are a few workarounds. To circumvent both issues you may use a shell such as bash on the Windows Subsystem for Linux (WSL) or read on for alternative solutions.

Garbage characters in the output

There is a limitation of the current Win32 version of curl. Until the Win32 curl issue is resolved and rolled out in a future Windows release, it is recommended that you use Powershell’s Invoke-Web-Request command instead:

Missing or double wide diagonal wind direction characters

The second issue is regarding the width of the diagonal arrow glyphs that some Windows Terminal Applications such as the default conhost.exe use. At the time of writing this, ConEmu.exe, ConEmu64.exe and Terminal Applications built on top of ConEmu such as Cmder (cmder.exe) use these double-wide glyphs by default. The result is the same with all of these programs, either a missing character for certain wind directions or a broken table in the output or both. Some third-party Terminal Applications have addressed the wind direction glyph issue but that fix depends on the font and the Terminal Application you are using. One way to display the diagonal wind direction glyphs in your Terminal Application is to use Windows Terminal which is currently available in the Microsoft Store. Windows Terminal is currently a preview release and will be rolled out as the default Terminal Application in an upcoming release. If your output is still skewed after using Windows Terminal then try maximizing the terminal window. Another way you can display the diagonal wind direction is to swap out the problematic characters with forward and backward slashes as shown here.

Installation

To install the application:

  1. Install external dependencies
  2. Install Python dependencies used by the service
  3. Configure IP2Location (optional)
  4. Get a WorldWeatherOnline API and configure wego
  5. Configure wttr.in
  6. Configure the HTTP-frontend service

Install external dependencies

wttr.in has the following external dependencies:

After you install golang, install wego:

$ go get -u github.com/schachmat/wego
$ go install github.com/schachmat/wego

Install Python dependencies

Python requirements:

If you want to get weather reports as PNG files, you'll also need to install:

You can install most of them using pip.

Some python package use LLVM, so install it first:

$ apt-get install llvm-7 llvm-7-dev

If virtualenv is used:

$ virtualenv -p python3 ve
$ ve/bin/pip3 install -r requirements.txt
$ ve/bin/python3 bin/srv.py

Also, you need to install the geoip2 database. You can use a free database GeoLite2 that can be downloaded from (http://dev.maxmind.com/geoip/geoip2/geolite2/).

Configure IP2Location (optional)

If you want to use the IP2location service for IP-addresses that are not covered by GeoLite2, you have to obtain a API key of that service, and after that save into the ~/.ip2location.key file:

$ echo 'YOUR_IP2LOCATION_KEY' > ~/.ip2location.key

If you don't have this file, the service will be silently skipped (it is not a big problem, because the MaxMind database is pretty good).

Get a WorldWeatherOnline key and configure wego

To get a WorldWeatherOnline API key, you must register here:

https://developer.worldweatheronline.com/auth/register

After you have a WorldWeatherOnline key, you can save it into the WWO key file: ~/.wwo.key

Also, you have to specify the key in the wego configuration:

$ cat ~/.wegorc
{
    "APIKey": "00XXXXXXXXXXXXXXXXXXXXXXXXXXX",
    "City": "London",
    "Numdays": 3,
    "Imperial": false,
    "Lang": "en"
}

The City parameter in ~/.wegorc is ignored.

Configure wttr.in

Configure the following environment variables that define the path to the local wttr.in installation, to the GeoLite database, and to the wego installation. For example:

export WTTR_MYDIR="/home/igor/wttr.in"
export WTTR_GEOLITE="/home/igor/wttr.in/GeoLite2-City.mmdb"
export WTTR_WEGO="/home/igor/go/bin/wego"
export WTTR_LISTEN_HOST="0.0.0.0"
export WTTR_LISTEN_PORT="8002"

Configure the HTTP-frontend service

It's recommended that you also configure the web server that will be used to access the service:

server {
    listen [::]:80;
    server_name  wttr.in *.wttr.in;
    access_log  /var/log/nginx/wttr.in-access.log  main;
    error_log  /var/log/nginx/wttr.in-error.log;

    location / {
        proxy_pass         http://127.0.0.1:8002;

        proxy_set_header   Host             $host;
        proxy_set_header   X-Real-IP        $remote_addr;
        proxy_set_header   X-Forwarded-For  $remote_addr;

        client_max_body_size       10m;
        client_body_buffer_size    128k;

        proxy_connect_timeout      90;
        proxy_send_timeout         90;
        proxy_read_timeout         90;

        proxy_buffer_size          4k;
        proxy_buffers              4 32k;
        proxy_busy_buffers_size    64k;
        proxy_temp_file_write_size 64k;

        expires                    off;
    }
}