adafruit-nrfutil is a Python package that includes the
adafruit-nrfutil command line utility
This package is derived from the Nordic Semiconductor ASA package pc-nrfutil, version 0.5.3. The code has been converted from Python 2 to Python 3.
nrfutil has been renamed to
adafruit-nrfutil to distinguish it from the
This tool can be used with the Adafruit nRF52 Feather to flash firmware images onto the device using the simple serial port.
This library is written for Python 3.5+. It is no longer Python 2 compatible!
Run the following commands to make
adafruit-nrfutil available from the command line
or to development platforms like the Arduino IDE or CircuitPython:
This is recommended method, to install latest version
$ pip3 install --user adafruit-nrfutil
Use this method if you have issue installing with PyPi or want to modify the tool. First clone this repo and go into its folder.
$ git clone https://github.com/adafruit/Adafruit_nRF52_nrfutil.git $ cd Adafruit_nRF52_nrfutil
Note: following commands use
python3, however if you are on Windows, you may need to change it to
python since windows installation of python 3.x still uses the name python.exe
To install in user space in your home directory:
$ pip3 install -r requirements.txt $ python3 setup.py install
If you get permission errors when running
pip3 install, your
pip3 is older
or is set to try to install in the system directories. In that case use the
$ pip3 install -r --user requirements.txt $ python3 setup.py install
If you want to install in system directories (generally not recommended):
$ sudo pip3 install -r requirements.txt $ sudo python3 setup.py install
To generate a self-contained executable binary of the utility (Windows and MacOS), run these commands:
pip3 install pyinstaller cd Adafruit_nRF52_nrfutil pip3 install -r requirements.txt cd Adafruit_nRF52_nrfutil\nordicsemi pyinstaller __main__.py --onefile --clean --name adafruit-nrfutil
You will find the .exe in
Adafruit_nRF52_nrfutil\nordicsemi\dist\adafruit-nrfutil ( with
.exe if you are on windows).
Copy or move it elsewhere for your convenience, such as directory in your %PATH%.
To get info on the usage of adafruit-nrfutil:
To convert an nRF52 .hex file into a DFU pkg file that the serial bootloader can make use of:
adafruit-nrfutil dfu genpkg --dev-type 0x0052 --application firmware.hex dfu-package.zip
To flash a DFU pkg file over serial:
adafruit-nrfutil dfu serial --package dfu-package.zip -p /dev/tty.SLAB_USBtoUART -b 115200