org.apache.commons.cli2.builder.DefaultOptionBuilder Java Examples

The following examples show how to use org.apache.commons.cli2.builder.DefaultOptionBuilder. You can vote up the ones you like or vote down the ones you don't like, and go to the original project or source file by following the links above each example. You may check out the related API usage on the sidebar.
Example #1
Source Project: jackrabbit-filevault   Author: apache   File: CmdConsole.java    License: Apache License 2.0 6 votes vote down vote up
protected Command createCommand() {
    return new CommandBuilder()
            .withName("console")
            .withDescription(getShortDescription())
            .withChildren(new GroupBuilder()
                    .withName("Options:")
                    .withOption(new DefaultOptionBuilder()
                            .withShortName("F")
                            .withLongName("console-settings")
                            .withDescription("specifies the console settings file. default is \"" + AbstractApplication.DEFAULT_CONF_FILENAME + "\"")
                            .withArgument(argFile = new ArgumentBuilder()
                            .withName("file")
                            .withMinimum(1)
                            .withMaximum(1)
                            .withValidator(FileValidator.getExistingFileInstance())
                            .create())
                            .create()
                            )
                    .create())
            .create();
}
 
Example #2
Source Project: jackrabbit-filevault   Author: apache   File: CmdLsRepo.java    License: Apache License 2.0 6 votes vote down vote up
protected Command createCommand() {
    return new CommandBuilder()
            .withName("ls")
            .withDescription(getShortDescription())
            .withChildren(new GroupBuilder()
                    .withName("Options:")
                    .withOption(optNodeType = new DefaultOptionBuilder()
                            .withShortName("n")
                            .withDescription("display the node type of the nodes")
                            .create())
                    .withOption(optUUID = new DefaultOptionBuilder()
                            .withShortName("u")
                            .withDescription("display the uuid of the referenceable nodes")
                            .create())
                    .withOption(optLong = new DefaultOptionBuilder()
                            .withShortName("l")
                            .withDescription("combines the flags 'n' and 'u'")
                            .create())
                    .withOption(argPath)
                    .create())
            .create();
}
 
Example #3
Source Project: jackrabbit-filevault   Author: apache   File: CmdRm.java    License: Apache License 2.0 6 votes vote down vote up
protected Command createCommand() {
    return new CommandBuilder()
            .withName("rm")
            .withDescription(getShortDescription())
            .withChildren(new GroupBuilder()
                    .withName("Options:")
                    .withOption(optRecursive = new DefaultOptionBuilder()
                            .withShortName("r")
                            .withDescription("remove the directory artifacts recursively")
                            .create())
                    .withOption(argPath = new ArgumentBuilder()
                            .withName("path")
                            .withDescription("the jcrfs path")
                            .withMinimum(1)
                            .withMaximum(1)
                            .create()
                    )
                    .create()
            )
            .create();
}
 
Example #4
Source Project: jackrabbit-filevault   Author: apache   File: CmdConnect.java    License: Apache License 2.0 6 votes vote down vote up
protected Command createCommand() {
    return new CommandBuilder()
            .withName("connect")
            .withDescription(getShortDescription())
            .withChildren(new GroupBuilder()
                    .withName("Options:")
                    .withOption(optForce = new DefaultOptionBuilder()
                            .withShortName("f")
                            .withDescription("force reconnect if already connected")
                            .create())
                    .withOption(argURI = new ArgumentBuilder()
                            .withName("rmiuri")
                            .withDescription("the rmi uri of the repository")
                            .withMinimum(0)
                            .withMaximum(1)
                            .create()
                    )
                    .create()
            )
            .create();
}
 
Example #5
Source Project: jackrabbit-filevault   Author: apache   File: CmdPropList.java    License: Apache License 2.0 6 votes vote down vote up
protected Command createCommand() {
    return new CommandBuilder()
            .withName("proplist")
            .withName("pl")
            .withDescription(getShortDescription())
            .withChildren(new GroupBuilder()
                    .withName("Options:")
                    .withOption(OPT_QUIET)
                    .withOption(optRecursive = new DefaultOptionBuilder()
                            .withShortName("R")
                            .withLongName("recursive")
                            .withDescription("descend recursively")
                            .create())
                    .withOption(argLocalPath = new ArgumentBuilder()
                            .withName("file")
                            .withDescription("file or directory to list the properties from")
                            .withMinimum(1)
                            .create())
                    .create()
            )
            .create();
}
 
Example #6
Source Project: jackrabbit-filevault   Author: apache   File: CmdLsJcrFs.java    License: Apache License 2.0 6 votes vote down vote up
protected Command createCommand() {
    return new CommandBuilder()
            .withName("ls")
            .withDescription(getShortDescription())
            .withChildren(new GroupBuilder()
                    .withName("Options:")
                    .withOption(optTime = new DefaultOptionBuilder()
                            .withShortName("t")
                            .withDescription("display the last modification date")
                            .create())
                    .withOption(optSize = new DefaultOptionBuilder()
                            .withShortName("s")
                            .withDescription("display the file size")
                            .create())
                    .withOption(optMime = new DefaultOptionBuilder()
                            .withShortName("m")
                            .withDescription("display the mime type")
                            .create())
                    .withOption(optLong = new DefaultOptionBuilder()
                            .withShortName("l")
                            .withDescription("combines all format flags")
                            .create())
                    .withOption(argPath)
                    .create())
            .create();
}
 
Example #7
Source Project: jackrabbit-filevault   Author: apache   File: CmdRefresh.java    License: Apache License 2.0 6 votes vote down vote up
protected Command createCommand() {
    return new CommandBuilder()
            .withName("refresh")
            .withDescription(getShortDescription())
            .withChildren(new GroupBuilder()
                    .withName("Options:")
                    .withOption(optKeepChanges = new DefaultOptionBuilder()
                            .withShortName("k")
                            .withDescription("keep changes")
                            .create())
                    .withOption(argJcrPath = new ArgumentBuilder()
                            .withName("jcr-path")
                            .withDescription("the jcr path")
                            .withMinimum(0)
                            .withMaximum(1)
                            .create()
                    )
                    .create()
            )
            .create();
}
 
Example #8
Source Project: jackrabbit-filevault   Author: apache   File: CmdTree.java    License: Apache License 2.0 6 votes vote down vote up
protected Command createCommand() {
    return new CommandBuilder()
            .withName("tree")
            .withDescription(getShortDescription())
            .withChildren(new GroupBuilder()
                    .withName("Options:")
                    .withOption(optRecursive = new DefaultOptionBuilder()
                            .withShortName("r")
                            .withDescription("limit depth")
                            .withArgument(new ArgumentBuilder()
                                    .withName("depth")
                                    .withDescription("limit tree to <depth>")
                                    .withMinimum(1)
                                    .withMaximum(1)
                                    .withValidator(NumberValidator.getIntegerInstance())
                                    .create())
                            .create())
                    .withOption(argPath = new ArgumentBuilder()
                                    .withName("path")
                                    .withDescription("the path of the tree")
                                    .withMinimum(0)
                                    .withMaximum(1)
                                    .create())
                    .create())
            .create();
}
 
Example #9
Source Project: jackrabbit-filevault   Author: apache   File: CmdRevert.java    License: Apache License 2.0 6 votes vote down vote up
protected Command createCommand() {
    return new CommandBuilder()
            .withName("revert")
            .withName("rev")
            .withDescription(getShortDescription())
            .withChildren(new GroupBuilder()
                    .withName("Options:")
                    .withOption(OPT_QUIET)
                    .withOption(optRecursive = new DefaultOptionBuilder()
                            .withShortName("R")
                            .withLongName("recursive")
                            .withDescription("descend recursively")
                            .create())
                    .withOption(argLocalPath = new ArgumentBuilder()
                            .withName("file")
                            .withDescription("file or directory to revert")
                            .withMinimum(1)
                            .create()
                    )
                    .create()
            )
            .create();
}
 
Example #10
Source Project: jackrabbit-filevault   Author: apache   File: CmdInfo.java    License: Apache License 2.0 6 votes vote down vote up
protected Command createCommand() {
    return new CommandBuilder()
            .withName("info")
            .withDescription(getShortDescription())
            .withChildren(new GroupBuilder()
                    .withName("Options:")
                    .withOption(OPT_VERBOSE)
                    .withOption(OPT_QUIET)
                    .withOption(optRecursive = new DefaultOptionBuilder()
                            .withShortName("R")
                            .withLongName("recursive")
                            .withDescription("operate recursive")
                            .create())
                    .withOption(argLocalPath = new ArgumentBuilder()
                            .withName("file")
                            .withDescription("file or directory to display info")
                            .withMinimum(0)
                            .create()
                    )
                    .create()
            )
            .create();
}
 
Example #11
Source Project: jackrabbit-filevault   Author: apache   File: CmdDelete.java    License: Apache License 2.0 6 votes vote down vote up
protected Command createCommand() {
    return new CommandBuilder()
            .withName("delete")
            .withName("del")
            .withName("rm")
            .withDescription(getShortDescription())
            .withChildren(new GroupBuilder()
                    .withName("Options:")
                    .withOption(OPT_VERBOSE)
                    .withOption(OPT_QUIET)
                    .withOption(optForce = new DefaultOptionBuilder()
                            .withLongName("force")
                            .withDescription("force operation to run")
                            .create())
                    .withOption(argLocalPath = new ArgumentBuilder()
                            .withName("file")
                            .withDescription("file or directory to delete")
                            .withMinimum(1)
                            .create()
                    )
                    .create()
            )
            .create();
}
 
Example #12
Source Project: jackrabbit-filevault   Author: apache   File: CmdDiff.java    License: Apache License 2.0 6 votes vote down vote up
protected Command createCommand() {
    return new CommandBuilder()
            .withName("diff")
            .withName("di")
            .withDescription(getShortDescription())
            .withChildren(new GroupBuilder()
                    .withName("Options:")
                    .withOption(optNonRecursive = new DefaultOptionBuilder()
                            .withShortName("N")
                            .withLongName("non-recursive")
                            .withDescription("operate on single directory")
                            .create())
                    .withOption(argLocalPath = new ArgumentBuilder()
                            .withName("file")
                            .withDescription("file or directory to display the diffs from")
                            .withMinimum(0)
                            .create()
                    )
                    .create()
            )
            .create();
}
 
Example #13
Source Project: jackrabbit-filevault   Author: apache   File: CmdDump.java    License: Apache License 2.0 6 votes vote down vote up
protected Command createCommand() {
    return new CommandBuilder()
            .withName("dump")
            .withDescription(getShortDescription())
            .withChildren(new GroupBuilder()
                    .withName("Options:")
                    .withOption(optConfig = new DefaultOptionBuilder()
                            .withShortName("c")
                            .withLongName("config")
                            .withDescription("writes the config to the local file")
                            .create())
                    .withOption(optFilter = new DefaultOptionBuilder()
                            .withShortName("f")
                            .withLongName("filter")
                            .withDescription("writes the workspace filter to the local file")
                            .create())
                    .withOption(argPath = new ArgumentBuilder()
                            .withName("path")
                            .withDescription("the path")
                            .withMinimum(0)
                            .withMaximum(1)
                            .create())
                    .create())
            .create();
}
 
Example #14
Source Project: jackrabbit-filevault   Author: apache   File: CmdStatus.java    License: Apache License 2.0 5 votes vote down vote up
protected Command createCommand() {
    return new CommandBuilder()
            .withName("status")
            .withName("st")
            .withDescription(getShortDescription())
            .withChildren(new GroupBuilder()
                    .withName("Options:")
                    .withOption(OPT_VERBOSE)
                    .withOption(optOnlyControlled = new DefaultOptionBuilder()
                            .withShortName("q")
                            .withLongName("quiet")
                            .withDescription("show only status of controlled files")
                            .create())
                    .withOption(optShowUpdate = new DefaultOptionBuilder()
                            .withShortName("u")
                            .withLongName("show-update")
                            .withDescription("display update information")
                            .create())
                    .withOption(optNonRecursive = new DefaultOptionBuilder()
                            .withShortName("N")
                            .withLongName("non-recursive")
                            .withDescription("operate on single directory")
                            .create())
                    .withOption(argLocalPath = new ArgumentBuilder()
                            .withName("file")
                            .withDescription("file or directory to display the status")
                            .withMinimum(0)
                            .create()
                    )
                    .create()
            )
            .create();
}
 
Example #15
Source Project: jackrabbit-filevault   Author: apache   File: CmdMount.java    License: Apache License 2.0 5 votes vote down vote up
protected Command createCommand() {
    return new CommandBuilder()
            .withName("mount")
            .withDescription(getShortDescription())
            .withChildren(new GroupBuilder()
                    .withName("Options:")
                    .withOption(optForce = new DefaultOptionBuilder()
                            .withShortName("f")
                            .withLongName("force")
                            .withDescription("force remount if already mounted")
                            .create())
                    .withOption(optConfigFile = new DefaultOptionBuilder()
                            .withLongName("file")
                            .withDescription("config.xml for jcrfs")
                            .withArgument(new ArgumentBuilder()
                                    .withName("file")
                                    .withMinimum(0)
                                    .withMaximum(1)
                                    .create())
                            .create())
                    .withOption(optFilterFile = new DefaultOptionBuilder()
                            .withLongName("filter")
                            .withDescription("filter.xml for jcrfs")
                            .withArgument(new ArgumentBuilder()
                                    .withName("filter")
                                    .withMinimum(0)
                                    .withMaximum(1)
                                    .create())
                            .create())
                    .withOption(argPath = new ArgumentBuilder()
                            .withName("root")
                            .withDescription("the repository path that forms the mount root")
                            .withMinimum(0)
                            .withMaximum(1)
                            .create()
                    )
                    .create()
            )
            .create();
}
 
Example #16
Source Project: jackrabbit-filevault   Author: apache   File: CmdExport.java    License: Apache License 2.0 5 votes vote down vote up
protected Command createCommand() {
    return new CommandBuilder()
            .withName("export")
            .withDescription(getShortDescription())
            .withChildren(new GroupBuilder()
                    .withName("Options:")
                    .withOption(OPT_VERBOSE)
                    .withOption(optType = new DefaultOptionBuilder()
                            .withShortName("t")
                            .withDescription("specifies the export type. either 'platform' or 'jar'.")
                            .withArgument(new ArgumentBuilder()
                                    .withMinimum(0)
                                    .withMaximum(1)
                                    .create())
                            .create())
                    .withOption(optPrune = new DefaultOptionBuilder()
                            .withShortName("P")
                            .withLongName("prune-missing")
                            .withDescription("specifies if missing local files should be deleted.")
                            .create())
                    .withOption(argJcrPath = new ArgumentBuilder()
                            .withName("jcr-path")
                            .withDescription("the jcr path")
                            .withMinimum(0)
                            .withMaximum(1)
                            .create()
                    )
                    .withOption(argLocalPath = new ArgumentBuilder()
                            .withName("local-path")
                            .withDescription("the local path")
                            .withMinimum(0)
                            .withMaximum(1)
                            .create()
                    )
                    .create()
            )
            .create();
}
 
Example #17
Source Project: jackrabbit-filevault   Author: apache   File: CmdPropSet.java    License: Apache License 2.0 5 votes vote down vote up
protected Command createCommand() {
    return new CommandBuilder()
            .withName("propset")
            .withName("ps")
            .withDescription(getShortDescription())
            .withChildren(new GroupBuilder()
                    .withName("Options:")
                    .withOption(OPT_QUIET)
                    .withOption(optRecursive = new DefaultOptionBuilder()
                            .withShortName("R")
                            .withLongName("recursive")
                            .withDescription("descend recursively")
                            .create())
                    .withOption(argPropName = new ArgumentBuilder()
                            .withName("propname")
                            .withDescription("the property name")
                            .withMinimum(1)
                            .withMaximum(1)
                            .create())
                    .withOption(argPropValue = new ArgumentBuilder()
                            .withName("propval")
                            .withDescription("the property value")
                            .withMinimum(1)
                            .withMaximum(1)
                            .create())
                    .withOption(argLocalPath = new ArgumentBuilder()
                            .withName("file")
                            .withDescription("file or directory to set the property to")
                            .withMinimum(1)
                            .create())
                    .create()
            )
            .create();
}
 
Example #18
Source Project: jackrabbit-filevault   Author: apache   File: CmdPropGet.java    License: Apache License 2.0 5 votes vote down vote up
protected Command createCommand() {
    return new CommandBuilder()
            .withName("propget")
            .withName("pg")
            .withDescription(getShortDescription())
            .withChildren(new GroupBuilder()
                    .withName("Options:")
                    .withOption(OPT_QUIET)
                    .withOption(optRecursive = new DefaultOptionBuilder()
                            .withShortName("R")
                            .withLongName("recursive")
                            .withDescription("descend recursively")
                            .create())
                    .withOption(argPropName = new ArgumentBuilder()
                            .withName("propname")
                            .withDescription("the property name")
                            .withMinimum(1)
                            .withMaximum(1)
                            .create())
                    .withOption(argLocalPath = new ArgumentBuilder()
                            .withName("file")
                            .withDescription("file or directory to get the property from")
                            .withMinimum(1)
                            .create())
                    .create()
            )
            .create();
}
 
Example #19
Source Project: jackrabbit-filevault   Author: apache   File: CmdMixins.java    License: Apache License 2.0 5 votes vote down vote up
protected Command createCommand() {
    return new CommandBuilder()
            .withName("mixins")
            .withDescription(getShortDescription())
            .withChildren(new GroupBuilder()
                    .withName("Options:")
                    .withOption(optAdd = new DefaultOptionBuilder()
                            .withShortName("a")
                            .withLongName("add")
                            .withDescription("adds a mixin")
                            .withArgument(new ArgumentBuilder()
                                    .withName("nodetype")
                                    .withMinimum(1)
                                    .create())
                            .create())
                    .withOption(optRemove = new DefaultOptionBuilder()
                            .withShortName("r")
                            .withLongName("remove")
                            .withDescription("removes a mixin")
                            .withArgument(new ArgumentBuilder()
                                    .withName("nodetype")
                                    .withMinimum(1)
                                    .create())
                            .create())

                    .withOption(argJcrPath = new ArgumentBuilder()
                            .withName("jcr-path")
                            .withDescription("the jcr path")
                            .withMinimum(1)
                            .withMaximum(1)
                            .create()
                    )
                    .create()
            )
            .create();
}
 
Example #20
Source Project: jackrabbit-filevault   Author: apache   File: CmdLsAggregate.java    License: Apache License 2.0 5 votes vote down vote up
protected Command createCommand() {
    return new CommandBuilder()
            .withName("ls")
            .withDescription(getShortDescription())
            .withChildren(new GroupBuilder()
                    .withName("Options:")
                    .withOption(optType = new DefaultOptionBuilder()
                            .withShortName("t")
                            .withDescription("display the artfiact type")
                            .create())
                    .withOption(argPath)
                    .create())
            .create();
}
 
Example #21
Source Project: jackrabbit-filevault   Author: apache   File: CmdLogin.java    License: Apache License 2.0 5 votes vote down vote up
protected Command createCommand() {
    return new CommandBuilder()
            .withName("login")
            .withDescription(getShortDescription())
            .withChildren(new GroupBuilder()
                    .withName("Options:")
                    .withOption(optCreds = new DefaultOptionBuilder()
                            .withShortName("c")
                            .withLongName("credentials")
                            .withDescription("simple connection credentials")
                            .withArgument(new ArgumentBuilder()
                                    .withName("user:pass")
                                    .withMinimum(0)
                                    .withMaximum(1)
                                    .create())
                            .create())
                    .withOption(optForce = new DefaultOptionBuilder()
                            .withShortName("f")
                            .withLongName("force")
                            .withDescription("force relogin if already logged in")
                            .create())
                    .withOption(argWorkspace = new ArgumentBuilder()
                                    .withName("workspace")
                                    .withMinimum(0)
                                    .withMaximum(1)
                                    .create())
                            .create())
                    .create();
}
 
Example #22
Source Project: jackrabbit-filevault   Author: apache   File: CmdCommit.java    License: Apache License 2.0 5 votes vote down vote up
protected Command createCommand() {
    return new CommandBuilder()
            .withName("commit")
            .withName("ci")
            .withDescription(getShortDescription())
            .withChildren(new GroupBuilder()
                    .withName("Options:")
                    .withOption(OPT_VERBOSE)
                    .withOption(OPT_QUIET)
                    .withOption(optForce = new DefaultOptionBuilder()
                            .withLongName("force")
                            .withDescription("force comitting even if remote is modified")
                            .create())
                    .withOption(optNonRecursive = new DefaultOptionBuilder()
                            .withShortName("N")
                            .withLongName("non-recursive")
                            .withDescription("operate on single directory")
                            .create())
                    .withOption(argLocalPath = new ArgumentBuilder()
                            .withName("file")
                            .withDescription("file or directory to commit")
                            .withMinimum(0)
                            .create()
                    )
                    .create()
            )
            .create();
}
 
Example #23
Source Project: jackrabbit-filevault   Author: apache   File: CmdImportCli.java    License: Apache License 2.0 5 votes vote down vote up
protected Command createCommand() {
    return new CommandBuilder()
            .withName("import")
            .withDescription(getShortDescription())
            .withChildren(new GroupBuilder()
                    .withName("Options:")
                    .withOption(OPT_VERBOSE)
                    .withOption(optSync = new DefaultOptionBuilder()
                            .withShortName("s")
                            .withLongName("sync")
                            .withDescription("put local files under vault control.")
                            .create())
                    .withOption(optSysView = new DefaultOptionBuilder()
                            .withLongName("sysview")
                            .withDescription("specifies that the indicated local file has the sysview format")
                            .create())
                    .withOption(argMountpoint = new ArgumentBuilder()
                            .withName("uri")
                            .withDescription("mountpoint uri")
                            .withMinimum(1)
                            .withMaximum(1)
                            .create())
                    .withOption(argLocalPath = new ArgumentBuilder()
                            .withName("local-path")
                            .withDescription("the local path")
                            .withMinimum(0)
                            .withMaximum(1)
                            .create()
                    )
                    .withOption(argJcrPath = new ArgumentBuilder()
                            .withName("jcr-path")
                            .withDescription("the jcr path")
                            .withMinimum(0)
                            .withMaximum(1)
                            .create()
                    )
                    .create()
            )
            .create();
}
 
Example #24
Source Project: jackrabbit-filevault   Author: apache   File: CmdFormatCli.java    License: Apache License 2.0 5 votes vote down vote up
@Override
protected Command createCommand() {
    return new CommandBuilder()
            .withName("format")
            .withDescription(getShortDescription())
            .withChildren(new GroupBuilder()
                    .withOption(CliCommand.OPT_VERBOSE)
                    .withOption(optCheckOnly = new DefaultOptionBuilder()
                        .withShortName("c")
                        .withLongName("check-only")
                        .withDescription("Only check the format.")
                        .create()
                    )
                    .withOption(optPatterns = new DefaultOptionBuilder()
                            .withShortName("p")
                            .withLongName("pattern")
                            .withDescription("pattern for recursive format. defaults to match all xml files.")
                            .withArgument(new ArgumentBuilder()
                                    .withMinimum(0)
                                    .withConsumeRemaining("**dummy**")
                                    .create())
                            .create())
                    .withOption(argPaths = new ArgumentBuilder()
                            .withName("paths")
                            .withDescription("files or directories to format.")
                            .withMinimum(0)
                            .create()
                    )
                    .create())
            .create();
}
 
Example #25
Source Project: jackrabbit-filevault   Author: apache   File: CmdCheckout.java    License: Apache License 2.0 5 votes vote down vote up
protected Command createCommand() {
    argJcrPath = new ArgumentBuilder()
        .withName("jcrPath")
        .withDescription("remote path")
        .withMinimum(1)
        .withMaximum(1)
        .create();
    argLocalPath = new ArgumentBuilder()
        .withName("localPath")
        .withDescription("local path (optional)")
        .withMinimum(0)
        .withMaximum(1)
        .create();
    return new CommandBuilder()
            .withName("checkout")
            .withName("co")
            .withDescription(getShortDescription())
            .withChildren(new GroupBuilder()
                    .withName("Options:")
                    .withOption(optForce = new DefaultOptionBuilder()
                            .withLongName("force")
                            .withDescription("force checkout to overwrite local files if they already exist.")
                            .create())
                    .withOption(OPT_VERBOSE)
                    .withOption(OPT_QUIET)
                    .withOption(argJcrPath)
                    .withOption(argLocalPath)
                    .create()
            )
            .create();
}
 
Example #26
Source Project: jackrabbit-filevault   Author: apache   File: CmdGet.java    License: Apache License 2.0 5 votes vote down vote up
protected Command createCommand() {
    return new CommandBuilder()
            .withName("get")
            .withDescription(getShortDescription())
            .withChildren(new GroupBuilder()
                    .withName("Options:")
                    .withOption(optForce = new DefaultOptionBuilder()
                            .withShortName("f")
                            .withDescription("force overwrite if local file already exists")
                            .create())
                    .withOption(argJcrPath = new ArgumentBuilder()
                            .withName("jcrl-path")
                            .withDescription("the jcr path")
                            .withMinimum(1)
                            .withMaximum(1)
                            .create()
                    )
                    .withOption(argLocalPath = new ArgumentBuilder()
                            .withName("local-path")
                            .withDescription("the local path")
                            .withMinimum(0)
                            .withMaximum(1)
                            .create()
                    )
                    .create()
            )
            .create();
}
 
Example #27
Source Project: jackrabbit-filevault   Author: apache   File: CmdAdd.java    License: Apache License 2.0 5 votes vote down vote up
protected Command createCommand() {
    return new CommandBuilder()
            .withName("add")
            .withDescription(getShortDescription())
            .withChildren(new GroupBuilder()
                    .withName("Options:")
                    .withOption(OPT_VERBOSE)
                    .withOption(OPT_QUIET)
                    .withOption(optNonRecursive = new DefaultOptionBuilder()
                            .withShortName("N")
                            .withLongName("non-recursive")
                            .withDescription("operate on single directory")
                            .create())
                    .withOption(optForce = new DefaultOptionBuilder()
                            .withLongName("force")
                            .withDescription("force operation to run")
                            .create())
                    .withOption(argLocalPath = new ArgumentBuilder()
                            .withName("file")
                            .withDescription("local file or directory to add")
                            .withMinimum(1)
                            .create()
                    )
                    .create()
            )
            .create();
}
 
Example #28
Source Project: jackrabbit-filevault   Author: apache   File: CmdResolved.java    License: Apache License 2.0 5 votes vote down vote up
protected Command createCommand() {
    return new CommandBuilder()
            .withName("resolved")
            .withName("res")
            .withDescription(getShortDescription())
            .withChildren(new GroupBuilder()
                    .withName("Options:")
                    .withOption(OPT_QUIET)
                    .withOption(optRecursive = new DefaultOptionBuilder()
                            .withShortName("R")
                            .withLongName("recursive")
                            .withDescription("descend recursively")
                            .create())
                    .withOption(optForce = new DefaultOptionBuilder()
                            .withLongName("force")
                            .withDescription("resolve even if contains conflict markers")
                            .create())
                    .withOption(argLocalPath = new ArgumentBuilder()
                            .withName("file")
                            .withDescription("file or directory to resolve")
                            .withMinimum(1)
                            .create()
                    )
                    .create()
            )
            .create();
}
 
Example #29
Source Project: jackrabbit-filevault   Author: apache   File: CmdUpdate.java    License: Apache License 2.0 5 votes vote down vote up
protected Command createCommand() {
    return new CommandBuilder()
            .withName("update")
            .withName("up")
            .withDescription(getShortDescription())
            .withChildren(new GroupBuilder()
                    .withName("Options:")
                    .withOption(OPT_VERBOSE)
                    .withOption(OPT_QUIET)
                    .withOption(optForce = new DefaultOptionBuilder()
                            .withLongName("force")
                            .withDescription("force overwrite of local files")
                            .create())
                    .withOption(optNonRecursive = new DefaultOptionBuilder()
                            .withShortName("N")
                            .withLongName("non-recursive")
                            .withDescription("operate on single directory")
                            .create())
                    .withOption(argLocalPath = new ArgumentBuilder()
                            .withName("file")
                            .withDescription("file or directory to update")
                            .withMinimum(0)
                            .create()
                    )
                    .create()
            )
            .create();
}
 
Example #30
Source Project: jackrabbit-filevault   Author: apache   File: TestSubHelp.java    License: Apache License 2.0 5 votes vote down vote up
public static void main(String[] args) throws Exception {
    final DefaultOptionBuilder obuilder = new DefaultOptionBuilder();
    final ArgumentBuilder abuilder = new ArgumentBuilder();
    final CommandBuilder cbuilder = new CommandBuilder();
    final GroupBuilder gbuilder = new GroupBuilder();

    CmdSet set = new CmdSet();

    CliHelpFormatter hf = CliHelpFormatter.create();
    hf.setCmd(set);
    //hf.setHeader("bla bla version vla");
    //displayHelp();
    //hf.getFullUsageSettings().remove(DisplaySetting.DISPLAY_OPTIONAL);

    //hf.getDisplaySettings().add(DisplaySetting.DISPLAY_PARENT_ARGUMENT);
    //hf.getDisplaySettings().add(DisplaySetting.DISPLAY_PARENT_CHILDREN);

    //hf.getFullUsageSettings().remove(DisplaySetting.DISPLAY_OPTIONAL);
    //hf.getFullUsageSettings().remove(DisplaySetting.DISPLAY_GROUP_ARGUMENT);
    //hf.getFullUsageSettings().remove(DisplaySetting.DISPLAY_GROUP_EXPANDED);

    //hf.getDisplaySettings().remove(DisplaySetting.DISPLAY_GROUP_ARGUMENT);
    //hf.getDisplaySettings().remove(DisplaySetting.DISPLAY_PARENT_CHILDREN);
    //hf.getDisplaySettings().add(DisplaySetting.DISPLAY_OPTIONAL);

    //hf.getLineUsageSettings().add(DisplaySetting.DISPLAY_PROPERTY_OPTION);
    //hf.getLineUsageSettings().remove(DisplaySetting.DISPLAY_GROUP_ARGUMENT);
    //hf.getLineUsageSettings().add(DisplaySetting.DISPLAY_GROUP_NAME);
    //hf.getLineUsageSettings().remove(DisplaySetting.DISPLAY_PARENT_CHILDREN);
    //hf.getLineUsageSettings().add(DisplaySetting.DISPLAY_GROUP_ARGUMENT);
    //hf.getLineUsageSettings().remove(DisplaySetting.DISPLAY_GROUP_EXPANDED);
    //hf.getLineUsageSettings().remove(DisplaySetting.DISPLAY_PARENT_CHILDREN);
    //hf.getLineUsageSettings().remove(DisplaySetting.DISPLAY_PARENT_CHILDREN);

    //hf.getLineUsageSettings().add(DisplaySetting.DISPLAY_PROPERTY_OPTION);
    //hf.getLineUsageSettings().add(DisplaySetting.DISPLAY_PARENT_ARGUMENT);
    //hf.getLineUsageSettings().add(DisplaySetting.DISPLAY_ARGUMENT_BRACKETED);

    hf.print();
}