Java Code Examples for org.apache.camel.Producer#getEndpoint()

The following examples show how to use org.apache.camel.Producer#getEndpoint() . You can vote up the ones you like or vote down the ones you don't like, and go to the original project or source file by following the links above each example. You may check out the related API usage on the sidebar.
Example 1
Source File: file_s.java    From gumtree-spoon-ast-diff with Apache License 2.0 4 votes vote down vote up 
private void doProcessParallel(final ProcessorExchangePair pair) throws Exception {
    final Exchange exchange = pair.getExchange();
    Processor processor = pair.getProcessor();
    Producer producer = pair.getProducer();

    TracedRouteNodes traced = exchange.getUnitOfWork() != null ? exchange.getUnitOfWork().getTracedRouteNodes() : null;

    // compute time taken if sending to another endpoint
    StopWatch watch = null;
    if (producer != null) {
        watch = new StopWatch();
    }

    try {
        // prepare tracing starting from a new block
        if (traced != null) {
            traced.pushBlock();
        }

        if (producer != null) {
            EventHelper.notifyExchangeSending(exchange.getContext(), exchange, producer.getEndpoint());
        }
        // let the prepared process it, remember to begin the exchange pair
        AsyncProcessor async = AsyncProcessorConverterHelper.convert(processor);
        pair.begin();
        // we invoke it synchronously as parallel async routing is too hard
        AsyncProcessorHelper.process(async, exchange);
    } finally {
        pair.done();
        // pop the block so by next round we have the same staring point and thus the tracing looks accurate
        if (traced != null) {
            traced.popBlock();
        }
        if (producer != null) {
            long timeTaken = watch.stop();
            Endpoint endpoint = producer.getEndpoint();
            // emit event that the exchange was sent to the endpoint
            // this is okay to do here in the finally block, as the processing is not using the async routing engine
            //( we invoke it synchronously as parallel async routing is too hard)
            EventHelper.notifyExchangeSent(exchange.getContext(), exchange, endpoint, timeTaken);
        }
    }
}
Example 2
Source File: file_t.java    From gumtree-spoon-ast-diff with Apache License 2.0 4 votes vote down vote up 
private void doProcessParallel(final ProcessorExchangePair pair) throws Exception {
    final Exchange exchange = pair.getExchange();
    Processor processor = pair.getProcessor();
    Producer producer = pair.getProducer();

    TracedRouteNodes traced = exchange.getUnitOfWork() != null ? exchange.getUnitOfWork().getTracedRouteNodes() : null;

    // compute time taken if sending to another endpoint
    StopWatch watch = null;
    if (producer != null) {
        watch = new StopWatch();
    }

    try {
        // prepare tracing starting from a new block
        if (traced != null) {
            traced.pushBlock();
        }

        if (producer != null) {
            EventHelper.notifyExchangeSending(exchange.getContext(), exchange, producer.getEndpoint());
        }
        // let the prepared process it, remember to begin the exchange pair
        AsyncProcessor async = AsyncProcessorConverterHelper.convert(processor);
        pair.begin();
        // we invoke it synchronously as parallel async routing is too hard
        AsyncProcessorHelper.process(async, exchange);
    } finally {
        pair.done();
        // pop the block so by next round we have the same staring point and thus the tracing looks accurate
        if (traced != null) {
            traced.popBlock();
        }
        if (producer != null) {
            long timeTaken = watch.stop();
            Endpoint endpoint = producer.getEndpoint();
            // emit event that the exchange was sent to the endpoint
            // this is okay to do here in the finally block, as the processing is not using the async routing engine
            //( we invoke it synchronously as parallel async routing is too hard)
            EventHelper.notifyExchangeSent(exchange.getContext(), exchange, endpoint, timeTaken);
        }
    }
}
Example 3
Source File: patched.java    From gumtree-spoon-ast-diff with Apache License 2.0 4 votes vote down vote up 
private void doProcessParallel(final ProcessorExchangePair pair) throws Exception {
    final Exchange exchange = pair.getExchange();
    Processor processor = pair.getProcessor();
    Producer producer = pair.getProducer();

    TracedRouteNodes traced = exchange.getUnitOfWork() != null ? exchange.getUnitOfWork().getTracedRouteNodes() : null;

    // compute time taken if sending to another endpoint
    StopWatch watch = null;
    if (producer != null) {
        watch = new StopWatch();
    }

    try {
        // prepare tracing starting from a new block
        if (traced != null) {
            traced.pushBlock();
        }

        if (producer != null) {
            EventHelper.notifyExchangeSending(exchange.getContext(), exchange, producer.getEndpoint());
        }
        // let the prepared process it, remember to begin the exchange pair
        AsyncProcessor async = AsyncProcessorConverterHelper.convert(processor);
        pair.begin();
        // we invoke it synchronously as parallel async routing is too hard
        AsyncProcessorHelper.process(async, exchange);
    } finally {
        pair.done();
        // pop the block so by next round we have the same staring point and thus the tracing looks accurate
        if (traced != null) {
            traced.popBlock();
        }
        if (producer != null) {
            long timeTaken = watch.stop();
            Endpoint endpoint = producer.getEndpoint();
            // emit event that the exchange was sent to the endpoint
            // this is okay to do here in the finally block, as the processing is not using the async routing engine
            //( we invoke it synchronously as parallel async routing is too hard)
            EventHelper.notifyExchangeSent(exchange.getContext(), exchange, endpoint, timeTaken);
        }
    }
}
Example 4
Source File: original.java    From gumtree-spoon-ast-diff with Apache License 2.0 4 votes vote down vote up 
private void doProcessParallel(final ProcessorExchangePair pair) throws Exception {
    final Exchange exchange = pair.getExchange();
    Processor processor = pair.getProcessor();
    Producer producer = pair.getProducer();

    TracedRouteNodes traced = exchange.getUnitOfWork() != null ? exchange.getUnitOfWork().getTracedRouteNodes() : null;

    // compute time taken if sending to another endpoint
    StopWatch watch = null;
    if (producer != null) {
        watch = new StopWatch();
    }

    try {
        // prepare tracing starting from a new block
        if (traced != null) {
            traced.pushBlock();
        }

        if (producer != null) {
            EventHelper.notifyExchangeSending(exchange.getContext(), exchange, producer.getEndpoint());
        }
        // let the prepared process it, remember to begin the exchange pair
        AsyncProcessor async = AsyncProcessorConverterHelper.convert(processor);
        pair.begin();
        // we invoke it synchronously as parallel async routing is too hard
        AsyncProcessorHelper.process(async, exchange);
    } finally {
        pair.done();
        // pop the block so by next round we have the same staring point and thus the tracing looks accurate
        if (traced != null) {
            traced.popBlock();
        }
        if (producer != null) {
            long timeTaken = watch.stop();
            Endpoint endpoint = producer.getEndpoint();
            // emit event that the exchange was sent to the endpoint
            // this is okay to do here in the finally block, as the processing is not using the async routing engine
            //( we invoke it synchronously as parallel async routing is too hard)
            EventHelper.notifyExchangeSent(exchange.getContext(), exchange, endpoint, timeTaken);
        }
    }
}
Example 5
Source File: file_s.java    From gumtree-spoon-ast-diff with Apache License 2.0 4 votes vote down vote up 
private void doProcessParallel(final ProcessorExchangePair pair) throws Exception {
    final Exchange exchange = pair.getExchange();
    Processor processor = pair.getProcessor();
    Producer producer = pair.getProducer();

    TracedRouteNodes traced = exchange.getUnitOfWork() != null ? exchange.getUnitOfWork().getTracedRouteNodes() : null;

    // compute time taken if sending to another endpoint
    StopWatch watch = null;
    if (producer != null) {
        watch = new StopWatch();
    }

    try {
        // prepare tracing starting from a new block
        if (traced != null) {
            traced.pushBlock();
        }

        if (producer != null) {
            EventHelper.notifyExchangeSending(exchange.getContext(), exchange, producer.getEndpoint());
        }
        // let the prepared process it, remember to begin the exchange pair
        AsyncProcessor async = AsyncProcessorConverterHelper.convert(processor);
        pair.begin();
        // we invoke it synchronously as parallel async routing is too hard
        AsyncProcessorHelper.process(async, exchange);
    } finally {
        pair.done();
        // pop the block so by next round we have the same staring point and thus the tracing looks accurate
        if (traced != null) {
            traced.popBlock();
        }
        if (producer != null) {
            long timeTaken = watch.stop();
            Endpoint endpoint = producer.getEndpoint();
            // emit event that the exchange was sent to the endpoint
            // this is okay to do here in the finally block, as the processing is not using the async routing engine
            //( we invoke it synchronously as parallel async routing is too hard)
            EventHelper.notifyExchangeSent(exchange.getContext(), exchange, endpoint, timeTaken);
        }
    }
}
Example 6
Source File: file_t.java    From gumtree-spoon-ast-diff with Apache License 2.0 4 votes vote down vote up 
private void doProcessParallel(final ProcessorExchangePair pair) throws Exception {
    final Exchange exchange = pair.getExchange();
    Processor processor = pair.getProcessor();
    Producer producer = pair.getProducer();

    TracedRouteNodes traced = exchange.getUnitOfWork() != null ? exchange.getUnitOfWork().getTracedRouteNodes() : null;

    // compute time taken if sending to another endpoint
    StopWatch watch = null;
    if (producer != null) {
        watch = new StopWatch();
    }

    try {
        // prepare tracing starting from a new block
        if (traced != null) {
            traced.pushBlock();
        }

        if (producer != null) {
            EventHelper.notifyExchangeSending(exchange.getContext(), exchange, producer.getEndpoint());
        }
        // let the prepared process it, remember to begin the exchange pair
        AsyncProcessor async = AsyncProcessorConverterHelper.convert(processor);
        pair.begin();
        // we invoke it synchronously as parallel async routing is too hard
        AsyncProcessorHelper.process(async, exchange);
    } finally {
        pair.done();
        // pop the block so by next round we have the same staring point and thus the tracing looks accurate
        if (traced != null) {
            traced.popBlock();
        }
        if (producer != null) {
            long timeTaken = watch.stop();
            Endpoint endpoint = producer.getEndpoint();
            // emit event that the exchange was sent to the endpoint
            // this is okay to do here in the finally block, as the processing is not using the async routing engine
            //( we invoke it synchronously as parallel async routing is too hard)
            EventHelper.notifyExchangeSent(exchange.getContext(), exchange, endpoint, timeTaken);
        }
    }
}