depgraph-maven-plugin

- A Maven plugin that generates dependency graphs in various formats (DOT, GML, PlantUML, JSON and Text)

Build Status Maven Central Coverage Status license

This Maven plugin generates dependency graphs on single modules or in an aggregated form on multi-module projects. The dependency graphs can be created in the following formats:

For more information take a look at the Plugin Documentation, the Release Notes and the Wiki.

Getting Started

The depgraph-maven-plugin is available on Maven Central. So no further repository configuration is required.

Unless configured otherwise, the dependency graphs will be written to the project's build directory, target/dependency-graph.<extension>.

Run in your Maven Project

To use the plugin within your project, just add it to the <build> section:

<build>
  <plugins>
    <plugin>
      <groupId>com.github.ferstl</groupId>
      <artifactId>depgraph-maven-plugin</artifactId>
      <version>3.3.0</version>
      <configuration>
        ...
      </configuration>
    </plugin>
  </plugins>
</build>

Run on the Command Line

For ad-hoc dependency analysis the plugin can be used directly on the command line. To conveniently use this plugin on the command line, it is recommended to add the groupId com.github.ferstl as "plugin group" in your Maven settings.xml:

<settings>
  ...
  <pluginGroups>
    <pluginGroup>com.github.ferstl</pluginGroup>
  </pluginGroups>
  ...
</settings>

With this configuration, you can use the short form depgraph:<goal> on the command line, e.g.

mvn depgraph:graph

Without defining the plugin group, you need to fully qualify the plugin on the command line, e.g.:

# Latest version
mvn com.github.ferstl:depgraph-maven-plugin:graph

# Specific version
mvn com.github.ferstl:depgraph-maven-plugin:3.3.0:graph

Examples

All examples are based on a multi-module project with the following structure:

parent
- module-1
- module-2
- sub-parent
  - module-3

Each of the modules contains some dependencies in different scopes.

Simple Dependency Graph

A simple graph can be created by executing the depgraph:graph goal:

Simple dependency graph

The goal can be configured to show the versions and/or groupIds on the dependencies:

With versions (-DshowVersions)

Simple dependency graph with versions

With groupIds (-DshowGroupIds)

Simple dependency graph with groupIds

Duplicates and Conflicts

The depgraph:graph goal can be configured to show duplicate (-DshowDuplicates) and/or conflicting (-DshowConflicts) versions. Duplicate versions are shown as dotted black arrows. Conflicting versions are shown as dashed red arrows:

Dependency graph showing duplicates and conflicts

Duplicate dependencies do occur when more than one module defines the same dependency, which is not a problem: Maven's dependency resolution will just pick one dependency and omit all the duplicates. A conflict occurs when the same dependency occurs in different versions in the reactor. In this case Maven will choose the nearest version and ommit the others. Occurrences of conflicting versions should be investigated and solved if possible.

Dependency Graph by groupId

The depgraph:by-groupid goal creates a dependency graph using the groupId of the dependencies:

Dependency graph by groupId

Such graphs give a higher-level overview of a project, i.e. they show better which "frameworks" used by a maven project.

Aggregated Graphs

The goals depgraph:aggregate and depgraph:aggregate-by-groupid create aggregated dependency graphs on the root of a multi-module project. They show the union of all the modules' dependencies by omitting redundant edges. Here is an example of an aggregated graph, which connects the parent project and its modules with dotted black arrows (the sub-parent and its module-3 were excluded from the graph for clarity):

Aggregated dependency graph

The goal depgraph:aggregate-by-groupid does the same for the group IDs of all modules and their dependencies.

Graphs from Arbitrary Artifacts

The goal depgraph:for-artifact creates a dependency graph for an arbitrary artifact. This goal can be executed without a Maven project at any place:

Arbitrary Artifact

Styling

This Maven plugin offers you a variety of styling options for graphs in the DOT format. These options are explained in detail on the Styling Wiki page. This is an example of the aggregated graph with some custom styles:

Dependency graph with custom styles

It shows all dependencies with group ID com.github.ferstl with a blue background, all test dependencies with grey text and all other dependencies with grey background.

Other Graph Formats

GML for yEd

The GML graph format (set the graphFormat property to gml) allows visualizing a dependency graph in the yEd Graph Editor.

GML dependency graph in yEd

Since the generated dependency graph does not store any layout information, you need to layout the graph in yEd:

PlantUML

PlantUML graphs can be visualized with various tools, e.g. planttext.com or the PlantUML Integration for IntelliJ (requires Graphviz for rendering).

PlantUML dependency graph

Text

Text graphs are a more powerful alternative for mvn dependency:tree. They are printed to the console for direct investigation.

parent:1.0.0-SNAPSHOT:compile
+- module-1:1.0.0-SNAPSHOT:compile
|  +- commons-codec:1.10:compile
|  \- commons-lang3:3.1:compile
+- module-2:1.0.0-SNAPSHOT:compile
|  +- module-1:1.0.0-SNAPSHOT:compile
|  +- guava:21.0:compile
|  \- spring-core:5.0.6.RELEASE:compile (optional)
\- sub-parent:1.0.0-SNAPSHOT:compile
   +- module-3:1.0.0-SNAPSHOT:compile
   |  +- module-2:1.0.0-SNAPSHOT:compile
   |  \- querydsl-core:3.7.4:compile
   |     +- jsr305:1.3.9:compile
   |     +- mysema-commons-lang:0.2.4:compile
   |     \- bridge-method-annotation:1.13:compile
   \- module-2:1.0.0-SNAPSHOT:compile

For the aggregated graphs, the option -DrepeatTransitiveDependenciesInTextGraph will show transitive dependencies on each node. Without this option (which is the default), transitive dependencies will only be shown the first time they occur.

JSON

JSON graphs are intended for Javascript libraries or for further processing. Using this format will automatically enable the options showGroupIds, showVersions, showTypes and showClassifiers. The idea behind enabling these options is that the consumer of the JSON data should do its own filtering. This behavior can be disabled by setting showAllAttributesForJson to false.

{
  "graphName" : "parent",
  "artifacts" : [ {
    "id" : "com.github.ferstl:module-2:jar:compile",
    "numericId" : 1,
    "groupId" : "com.github.ferstl",
    "artifactId" : "module-2",
    "version" : "1.0.0-SNAPSHOT",
    "optional" : false,
    "scopes" : [ "compile" ],
    "types" : [ "jar" ]
  }, {
    "id" : "com.github.ferstl:module-1:jar:compile",
    "numericId" : 2,
    "groupId" : "com.github.ferstl",
    "artifactId" : "module-1",
    "version" : "1.0.0-SNAPSHOT",
    "optional" : false,
    "scopes" : [ "compile" ],
    "types" : [ "jar" ]
  } ],
  "dependencies" : [ {
    "from" : "com.github.ferstl:module-2:jar:compile",
    "to" : "com.github.ferstl:module-1:jar:compile",
    "numericFrom" : 0,
    "numericTo" : 1,
    "resolution" : "INCLUDED"
  } ]
}

FAQ

Q: Help! The dependency graph of my 10 year old 100-module enterprise project looks like a ball of wool. I can't see anything!

A: Think carefully what information you want to see in your dependency graph. Do you really want to have all third-party dependencies in your graph or do you want to see only the dependencies between your own modules? Would the groupId graph be a better alternative? Generally, you should consequently exclude dependencies that don't give you useful information. The inclusion/exclusion mechanisms in this plugin are quite powerful and easy to use. A good starting point is the exclusion of dependencies to "utility" libraries, such as commons-lang, guava or my-enterprise-project-common. Such dependencies are typically used by every single module which is (in most cases) perfectly fine. So they don't give you much useful information when they show up in the dependency graph.


Q: Help! This plugin has thousands of parameters. How do I know which ones to choose?

A: Don't worry, there are only less than 40 parameters and the plugin provides good defaults for most of them. Start your dependency graph without setting any parameters and see if it fits your needs. If it doesn't, start customizing it:

That's basically it. If you get interested in further customizations or if you want to do a more detailed analysis of your dependencies, take a look at the other parameters.


Q: Why can't I show duplicates and conflicts in the aggregated graph.

A: This does not make sense because dependencies are resolved individually for each module in the reactor. As a result, the same dependency edge in the graph could once occur as conflict, once as duplicate and once as resolved dependency.

Example: Suppose, we have two modules module-1 and module-2 in the reactor. module-2 has a dependency to module-1 and both modules have a dependency to the third-party library commons-wtf. module-1 references version 3.0 of this library and module-2 references version 3.1. If we now would display conflicts in the aggregated graph, we would get these edges (amongst others):

module-1 --- 3.1 (included) ---> commons-wtf  (perspective of module-1)
module-1 --- 3.1 (conflict) ---> commons-wtf  (perspective of module-2)
module-2 --- 3.0 (included) ---> commons-wtf  (perspective of module-2)

Such a graph is not useful whatsoever. Unless it is not possible to access all resolved dependencies within the whole reactor, we cannot show duplicates and conflicts.


Q: How do the includes/excludes and the other filtering parameters work?

A: The filtering parameters are a comma-separated list in the form of groupId:artifactId:type:classifier. Not all parts need to be specified and there is wildcard support. Examples:

A dependency will show up in the graph when it matches the includes list and doesn't match the excludes list.

Take also a look at the Filtering documentation in the Wiki.