/*
* Copyright (C) 2015 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package com.android.launcher3.util;
import android.graphics.Canvas;
import android.graphics.Paint;
import android.graphics.Rect;
import android.view.animation.AnimationUtils;
import android.view.animation.DecelerateInterpolator;
import android.view.animation.Interpolator;
/**
* This class differs from the framework {@link android.widget.EdgeEffect}:
* 1) It does not use PorterDuffXfermode
* 2) The width to radius factor is smaller (0.5 instead of 0.75)
*/
public class LauncherEdgeEffect {
// Time it will take the effect to fully recede in ms
private static final int RECEDE_TIME = 600;
// Time it will take before a pulled glow begins receding in ms
private static final int PULL_TIME = 167;
// Time it will take in ms for a pulled glow to decay to partial strength before release
private static final int PULL_DECAY_TIME = 2000;
private static final float MAX_ALPHA = 0.5f;
private static final float MAX_GLOW_SCALE = 2.f;
private static final float PULL_GLOW_BEGIN = 0.f;
// Minimum velocity that will be absorbed
private static final int MIN_VELOCITY = 100;
// Maximum velocity, clamps at this value
private static final int MAX_VELOCITY = 10000;
private static final float EPSILON = 0.001f;
private static final double ANGLE = Math.PI / 6;
private static final float SIN = (float) Math.sin(ANGLE);
private static final float COS = (float) Math.cos(ANGLE);
private float mGlowAlpha;
private float mGlowScaleY;
private float mGlowAlphaStart;
private float mGlowAlphaFinish;
private float mGlowScaleYStart;
private float mGlowScaleYFinish;
private long mStartTime;
private float mDuration;
private final Interpolator mInterpolator;
private static final int STATE_IDLE = 0;
private static final int STATE_PULL = 1;
private static final int STATE_ABSORB = 2;
private static final int STATE_RECEDE = 3;
private static final int STATE_PULL_DECAY = 4;
private static final float PULL_DISTANCE_ALPHA_GLOW_FACTOR = 0.8f;
private static final int VELOCITY_GLOW_FACTOR = 6;
private int mState = STATE_IDLE;
private float mPullDistance;
private final Rect mBounds = new Rect();
private final Paint mPaint = new Paint();
private float mRadius;
private float mBaseGlowScale;
private float mDisplacement = 0.5f;
private float mTargetDisplacement = 0.5f;
/**
* Construct a new EdgeEffect with a theme appropriate for the provided context.
*/
public LauncherEdgeEffect() {
mPaint.setAntiAlias(true);
mPaint.setStyle(Paint.Style.FILL);
mInterpolator = new DecelerateInterpolator();
}
/**
* Set the size of this edge effect in pixels.
*
* @param width Effect width in pixels
* @param height Effect height in pixels
*/
public void setSize(int width, int height) {
final float r = width * 0.5f / SIN;
final float y = COS * r;
final float h = r - y;
final float or = height * 0.75f / SIN;
final float oy = COS * or;
final float oh = or - oy;
mRadius = r;
mBaseGlowScale = h > 0 ? Math.min(oh / h, 1.f) : 1.f;
mBounds.set(mBounds.left, mBounds.top, width, (int) Math.min(height, h));
}
/**
* Reports if this EdgeEffect's animation is finished. If this method returns false
* after a call to {@link #draw(Canvas)} the host widget should schedule another
* drawing pass to continue the animation.
*
* @return true if animation is finished, false if drawing should continue on the next frame.
*/
public boolean isFinished() {
return mState == STATE_IDLE;
}
/**
* Immediately finish the current animation.
* After this call {@link #isFinished()} will return true.
*/
public void finish() {
mState = STATE_IDLE;
}
/**
* A view should call this when content is pulled away from an edge by the user.
* This will update the state of the current visual effect and its associated animation.
* The host view should always {@link android.view.View#invalidate()} after this
* and draw the results accordingly.
*
* <p>Views using EdgeEffect should favor {@link #onPull(float, float)} when the displacement
* of the pull point is known.</p>
*
* @param deltaDistance Change in distance since the last call. Values may be 0 (no change) to
* 1.f (full length of the view) or negative values to express change
* back toward the edge reached to initiate the effect.
*/
public void onPull(float deltaDistance) {
onPull(deltaDistance, 0.5f);
}
/**
* A view should call this when content is pulled away from an edge by the user.
* This will update the state of the current visual effect and its associated animation.
* The host view should always {@link android.view.View#invalidate()} after this
* and draw the results accordingly.
*
* @param deltaDistance Change in distance since the last call. Values may be 0 (no change) to
* 1.f (full length of the view) or negative values to express change
* back toward the edge reached to initiate the effect.
* @param displacement The displacement from the starting side of the effect of the point
* initiating the pull. In the case of touch this is the finger position.
* Values may be from 0-1.
*/
public void onPull(float deltaDistance, float displacement) {
final long now = AnimationUtils.currentAnimationTimeMillis();
mTargetDisplacement = displacement;
if (mState == STATE_PULL_DECAY && now - mStartTime < mDuration) {
return;
}
if (mState != STATE_PULL) {
mGlowScaleY = Math.max(PULL_GLOW_BEGIN, mGlowScaleY);
}
mState = STATE_PULL;
mStartTime = now;
mDuration = PULL_TIME;
mPullDistance += deltaDistance;
final float absdd = Math.abs(deltaDistance);
mGlowAlpha = mGlowAlphaStart = Math.min(MAX_ALPHA,
mGlowAlpha + (absdd * PULL_DISTANCE_ALPHA_GLOW_FACTOR));
if (mPullDistance == 0) {
mGlowScaleY = mGlowScaleYStart = 0;
} else {
final float scale = (float) (Math.max(0, 1 - 1 /
Math.sqrt(Math.abs(mPullDistance) * mBounds.height()) - 0.3d) / 0.7d);
mGlowScaleY = mGlowScaleYStart = scale;
}
mGlowAlphaFinish = mGlowAlpha;
mGlowScaleYFinish = mGlowScaleY;
}
/**
* Call when the object is released after being pulled.
* This will begin the "decay" phase of the effect. After calling this method
* the host view should {@link android.view.View#invalidate()} and thereby
* draw the results accordingly.
*/
public void onRelease() {
mPullDistance = 0;
if (mState != STATE_PULL && mState != STATE_PULL_DECAY) {
return;
}
mState = STATE_RECEDE;
mGlowAlphaStart = mGlowAlpha;
mGlowScaleYStart = mGlowScaleY;
mGlowAlphaFinish = 0.f;
mGlowScaleYFinish = 0.f;
mStartTime = AnimationUtils.currentAnimationTimeMillis();
mDuration = RECEDE_TIME;
}
/**
* Call when the effect absorbs an impact at the given velocity.
* Used when a fling reaches the scroll boundary.
*
* <p>When using a {@link android.widget.Scroller} or {@link android.widget.OverScroller},
* the method <code>getCurrVelocity</code> will provide a reasonable approximation
* to use here.</p>
*
* @param velocity Velocity at impact in pixels per second.
*/
public void onAbsorb(int velocity) {
mState = STATE_ABSORB;
velocity = Math.min(Math.max(MIN_VELOCITY, Math.abs(velocity)), MAX_VELOCITY);
mStartTime = AnimationUtils.currentAnimationTimeMillis();
mDuration = 0.15f + (velocity * 0.02f);
// The glow depends more on the velocity, and therefore starts out
// nearly invisible.
mGlowAlphaStart = 0.3f;
mGlowScaleYStart = Math.max(mGlowScaleY, 0.f);
// Growth for the size of the glow should be quadratic to properly
// respond
// to a user's scrolling speed. The faster the scrolling speed, the more
// intense the effect should be for both the size and the saturation.
mGlowScaleYFinish = Math.min(0.025f + (velocity * (velocity / 100) * 0.00015f) / 2, 1.f);
// Alpha should change for the glow as well as size.
mGlowAlphaFinish = Math.max(
mGlowAlphaStart, Math.min(velocity * VELOCITY_GLOW_FACTOR * .00001f, MAX_ALPHA));
mTargetDisplacement = 0.5f;
}
/**
* Set the color of this edge effect in argb.
*
* @param color Color in argb
*/
public void setColor(int color) {
mPaint.setColor(color);
}
/**
* Return the color of this edge effect in argb.
* @return The color of this edge effect in argb
*/
public int getColor() {
return mPaint.getColor();
}
/**
* Draw into the provided canvas. Assumes that the canvas has been rotated
* accordingly and the size has been set. The effect will be drawn the full
* width of X=0 to X=width, beginning from Y=0 and extending to some factor <
* 1.f of height.
*
* @param canvas Canvas to draw into
* @return true if drawing should continue beyond this frame to continue the
* animation
*/
public boolean draw(Canvas canvas) {
update();
final float centerX = mBounds.centerX();
final float centerY = mBounds.height() - mRadius;
canvas.scale(1.f, Math.min(mGlowScaleY, 1.f) * mBaseGlowScale, centerX, 0);
final float displacement = Math.max(0, Math.min(mDisplacement, 1.f)) - 0.5f;
float translateX = mBounds.width() * displacement / 2;
mPaint.setAlpha((int) (0xff * mGlowAlpha));
canvas.drawCircle(centerX + translateX, centerY, mRadius, mPaint);
boolean oneLastFrame = false;
if (mState == STATE_RECEDE && mGlowScaleY == 0) {
mState = STATE_IDLE;
oneLastFrame = true;
}
return mState != STATE_IDLE || oneLastFrame;
}
/**
* Return the maximum height that the edge effect will be drawn at given the original
* {@link #setSize(int, int) input size}.
* @return The maximum height of the edge effect
*/
public int getMaxHeight() {
return (int) (mBounds.height() * MAX_GLOW_SCALE + 0.5f);
}
private void update() {
final long time = AnimationUtils.currentAnimationTimeMillis();
final float t = Math.min((time - mStartTime) / mDuration, 1.f);
final float interp = mInterpolator.getInterpolation(t);
mGlowAlpha = mGlowAlphaStart + (mGlowAlphaFinish - mGlowAlphaStart) * interp;
mGlowScaleY = mGlowScaleYStart + (mGlowScaleYFinish - mGlowScaleYStart) * interp;
mDisplacement = (mDisplacement + mTargetDisplacement) / 2;
if (t >= 1.f - EPSILON) {
switch (mState) {
case STATE_ABSORB:
mState = STATE_RECEDE;
mStartTime = AnimationUtils.currentAnimationTimeMillis();
mDuration = RECEDE_TIME;
mGlowAlphaStart = mGlowAlpha;
mGlowScaleYStart = mGlowScaleY;
// After absorb, the glow should fade to nothing.
mGlowAlphaFinish = 0.f;
mGlowScaleYFinish = 0.f;
break;
case STATE_PULL:
mState = STATE_PULL_DECAY;
mStartTime = AnimationUtils.currentAnimationTimeMillis();
mDuration = PULL_DECAY_TIME;
mGlowAlphaStart = mGlowAlpha;
mGlowScaleYStart = mGlowScaleY;
// After pull, the glow should fade to nothing.
mGlowAlphaFinish = 0.f;
mGlowScaleYFinish = 0.f;
break;
case STATE_PULL_DECAY:
mState = STATE_RECEDE;
break;
case STATE_RECEDE:
mState = STATE_IDLE;
break;
}
}
}
}
