Java Code Examples for org.omg.CORBA.NamedValue#value()

The following examples show how to use org.omg.CORBA.NamedValue#value() . These examples are extracted from open source projects. You can vote up the ones you like or vote down the ones you don't like, and go to the original project or source file by following the links above each example. You may check out the related API usage on the sidebar.
Example 1
/**
 * See RequestInfoImpl for javadoc.
 */
public Any result (){
    checkAccess( MID_RESULT );

    if( cachedResult == null ) {
        if( request == null ) {
            throw stdWrapper.piOperationNotSupported5() ;
        }
        // Get the result from the DII request data.
        NamedValue nvResult = request.result( );

        if( nvResult == null ) {
            throw wrapper.piDiiResultIsNull() ;
        }

        cachedResult = nvResult.value();
    }

    // Good citizen: In the interest of efficiency, we assume that
    // interceptors will not modify the contents of the result Any.
    // Otherwise, we would need to create a deep copy of the Any.

    return cachedResult;
}
 
Example 2
/**
 * See RequestInfoImpl for javadoc.
 */
public Any result (){
    checkAccess( MID_RESULT );

    if( cachedResult == null ) {
        if( request == null ) {
            throw stdWrapper.piOperationNotSupported5() ;
        }
        // Get the result from the DII request data.
        NamedValue nvResult = request.result( );

        if( nvResult == null ) {
            throw wrapper.piDiiResultIsNull() ;
        }

        cachedResult = nvResult.value();
    }

    // Good citizen: In the interest of efficiency, we assume that
    // interceptors will not modify the contents of the result Any.
    // Otherwise, we would need to create a deep copy of the Any.

    return cachedResult;
}
 
Example 3
/**
 * See RequestInfoImpl for javadoc.
 */
public Any result (){
    checkAccess( MID_RESULT );

    if( cachedResult == null ) {
        if( request == null ) {
            throw stdWrapper.piOperationNotSupported5() ;
        }
        // Get the result from the DII request data.
        NamedValue nvResult = request.result( );

        if( nvResult == null ) {
            throw wrapper.piDiiResultIsNull() ;
        }

        cachedResult = nvResult.value();
    }

    // Good citizen: In the interest of efficiency, we assume that
    // interceptors will not modify the contents of the result Any.
    // Otherwise, we would need to create a deep copy of the Any.

    return cachedResult;
}
 
Example 4
/**
 * See RequestInfoImpl for javadoc.
 */
public Any result (){
    checkAccess( MID_RESULT );

    if( cachedResult == null ) {
        if( request == null ) {
            throw stdWrapper.piOperationNotSupported5() ;
        }
        // Get the result from the DII request data.
        NamedValue nvResult = request.result( );

        if( nvResult == null ) {
            throw wrapper.piDiiResultIsNull() ;
        }

        cachedResult = nvResult.value();
    }

    // Good citizen: In the interest of efficiency, we assume that
    // interceptors will not modify the contents of the result Any.
    // Otherwise, we would need to create a deep copy of the Any.

    return cachedResult;
}
 
Example 5
Source Project: JDKSourceCode1.8   File: ClientRequestInfoImpl.java    License: MIT License 6 votes vote down vote up
/**
 * See RequestInfoImpl for javadoc.
 */
public Any result (){
    checkAccess( MID_RESULT );

    if( cachedResult == null ) {
        if( request == null ) {
            throw stdWrapper.piOperationNotSupported5() ;
        }
        // Get the result from the DII request data.
        NamedValue nvResult = request.result( );

        if( nvResult == null ) {
            throw wrapper.piDiiResultIsNull() ;
        }

        cachedResult = nvResult.value();
    }

    // Good citizen: In the interest of efficiency, we assume that
    // interceptors will not modify the contents of the result Any.
    // Otherwise, we would need to create a deep copy of the Any.

    return cachedResult;
}
 
Example 6
/**
 * See RequestInfoImpl for javadoc.
 */
public Any result (){
    checkAccess( MID_RESULT );

    if( cachedResult == null ) {
        if( request == null ) {
            throw stdWrapper.piOperationNotSupported5() ;
        }
        // Get the result from the DII request data.
        NamedValue nvResult = request.result( );

        if( nvResult == null ) {
            throw wrapper.piDiiResultIsNull() ;
        }

        cachedResult = nvResult.value();
    }

    // Good citizen: In the interest of efficiency, we assume that
    // interceptors will not modify the contents of the result Any.
    // Otherwise, we would need to create a deep copy of the Any.

    return cachedResult;
}
 
Example 7
/**
 * See RequestInfoImpl for javadoc.
 */
public Any result (){
    checkAccess( MID_RESULT );

    if( cachedResult == null ) {
        if( request == null ) {
            throw stdWrapper.piOperationNotSupported5() ;
        }
        // Get the result from the DII request data.
        NamedValue nvResult = request.result( );

        if( nvResult == null ) {
            throw wrapper.piDiiResultIsNull() ;
        }

        cachedResult = nvResult.value();
    }

    // Good citizen: In the interest of efficiency, we assume that
    // interceptors will not modify the contents of the result Any.
    // Otherwise, we would need to create a deep copy of the Any.

    return cachedResult;
}
 
Example 8
public void unmarshalReply(InputStream is)
{
    // First unmarshal the return value if it is not void
    if ( _result != null ) {
        Any returnAny = _result.value();
        TypeCode returnType = returnAny.type();
        if ( returnType.kind().value() != TCKind._tk_void )
            returnAny.read_value(is, returnType);
    }

    // Now unmarshal the out/inout args
    try {
        for ( int i=0; i<_arguments.count() ; i++) {
            NamedValue nv = _arguments.item(i);
            switch( nv.flags() ) {
            case ARG_IN.value:
                break;
            case ARG_OUT.value:
            case ARG_INOUT.value:
                Any any = nv.value();
                any.read_value(is, any.type());
                break;
            }
        }
    }
    catch ( org.omg.CORBA.Bounds ex ) {
        // Cannot happen since we only iterate till _arguments.count()
    }
}
 
Example 9
/**
 * Internal utility method to convert an NVList into a PI Parameter[]
 */
protected Parameter[] nvListToParameterArray( NVList parNVList ) {

    // _REVISIT_ This utility method should probably be doing a deep
    // copy so interceptor can't accidentally change the arguments.

    int count = parNVList.count();
    Parameter[] plist = new Parameter[count];
    try {
        for( int i = 0; i < count; i++ ) {
            Parameter p = new Parameter();
            plist[i] = p;
            NamedValue nv = parNVList.item( i );
            plist[i].argument = nv.value();
            // ParameterMode spec can be found in 99-10-07.pdf
            // Section:10.5.22
            // nv.flags spec can be found in 99-10-07.pdf
            // Section 7.1.1
            // nv.flags has ARG_IN as 1, ARG_OUT as 2 and ARG_INOUT as 3
            // To convert this into enum PARAM_IN, PARAM_OUT and
            // PARAM_INOUT the value is subtracted by 1.
            plist[i].mode = ParameterMode.from_int( nv.flags() - 1 );
        }
    } catch ( Exception e ) {
        throw wrapper.exceptionInArguments( e ) ;
    }

    return plist;
}
 
Example 10
/**
 * Internal utility method to convert an NVList into a PI Parameter[]
 */
protected Parameter[] nvListToParameterArray( NVList parNVList ) {

    // _REVISIT_ This utility method should probably be doing a deep
    // copy so interceptor can't accidentally change the arguments.

    int count = parNVList.count();
    Parameter[] plist = new Parameter[count];
    try {
        for( int i = 0; i < count; i++ ) {
            Parameter p = new Parameter();
            plist[i] = p;
            NamedValue nv = parNVList.item( i );
            plist[i].argument = nv.value();
            // ParameterMode spec can be found in 99-10-07.pdf
            // Section:10.5.22
            // nv.flags spec can be found in 99-10-07.pdf
            // Section 7.1.1
            // nv.flags has ARG_IN as 1, ARG_OUT as 2 and ARG_INOUT as 3
            // To convert this into enum PARAM_IN, PARAM_OUT and
            // PARAM_INOUT the value is subtracted by 1.
            plist[i].mode = ParameterMode.from_int( nv.flags() - 1 );
        }
    } catch ( Exception e ) {
        throw wrapper.exceptionInArguments( e ) ;
    }

    return plist;
}
 
Example 11
public void unmarshalReply(InputStream is)
{
    // First unmarshal the return value if it is not void
    if ( _result != null ) {
        Any returnAny = _result.value();
        TypeCode returnType = returnAny.type();
        if ( returnType.kind().value() != TCKind._tk_void )
            returnAny.read_value(is, returnType);
    }

    // Now unmarshal the out/inout args
    try {
        for ( int i=0; i<_arguments.count() ; i++) {
            NamedValue nv = _arguments.item(i);
            switch( nv.flags() ) {
            case ARG_IN.value:
                break;
            case ARG_OUT.value:
            case ARG_INOUT.value:
                Any any = nv.value();
                any.read_value(is, any.type());
                break;
            }
        }
    }
    catch ( org.omg.CORBA.Bounds ex ) {
        // Cannot happen since we only iterate till _arguments.count()
    }
}
 
Example 12
/**
 * Internal utility method to convert an NVList into a PI Parameter[]
 */
protected Parameter[] nvListToParameterArray( NVList parNVList ) {

    // _REVISIT_ This utility method should probably be doing a deep
    // copy so interceptor can't accidentally change the arguments.

    int count = parNVList.count();
    Parameter[] plist = new Parameter[count];
    try {
        for( int i = 0; i < count; i++ ) {
            Parameter p = new Parameter();
            plist[i] = p;
            NamedValue nv = parNVList.item( i );
            plist[i].argument = nv.value();
            // ParameterMode spec can be found in 99-10-07.pdf
            // Section:10.5.22
            // nv.flags spec can be found in 99-10-07.pdf
            // Section 7.1.1
            // nv.flags has ARG_IN as 1, ARG_OUT as 2 and ARG_INOUT as 3
            // To convert this into enum PARAM_IN, PARAM_OUT and
            // PARAM_INOUT the value is subtracted by 1.
            plist[i].mode = ParameterMode.from_int( nv.flags() - 1 );
        }
    } catch ( Exception e ) {
        throw wrapper.exceptionInArguments( e ) ;
    }

    return plist;
}
 
Example 13
/**
 * Internal utility method to convert an NVList into a PI Parameter[]
 */
protected Parameter[] nvListToParameterArray( NVList parNVList ) {

    // _REVISIT_ This utility method should probably be doing a deep
    // copy so interceptor can't accidentally change the arguments.

    int count = parNVList.count();
    Parameter[] plist = new Parameter[count];
    try {
        for( int i = 0; i < count; i++ ) {
            Parameter p = new Parameter();
            plist[i] = p;
            NamedValue nv = parNVList.item( i );
            plist[i].argument = nv.value();
            // ParameterMode spec can be found in 99-10-07.pdf
            // Section:10.5.22
            // nv.flags spec can be found in 99-10-07.pdf
            // Section 7.1.1
            // nv.flags has ARG_IN as 1, ARG_OUT as 2 and ARG_INOUT as 3
            // To convert this into enum PARAM_IN, PARAM_OUT and
            // PARAM_INOUT the value is subtracted by 1.
            plist[i].mode = ParameterMode.from_int( nv.flags() - 1 );
        }
    } catch ( Exception e ) {
        throw wrapper.exceptionInArguments( e ) ;
    }

    return plist;
}
 
Example 14
Source Project: hottub   File: RequestImpl.java    License: GNU General Public License v2.0 5 votes vote down vote up
public void unmarshalReply(InputStream is)
{
    // First unmarshal the return value if it is not void
    if ( _result != null ) {
        Any returnAny = _result.value();
        TypeCode returnType = returnAny.type();
        if ( returnType.kind().value() != TCKind._tk_void )
            returnAny.read_value(is, returnType);
    }

    // Now unmarshal the out/inout args
    try {
        for ( int i=0; i<_arguments.count() ; i++) {
            NamedValue nv = _arguments.item(i);
            switch( nv.flags() ) {
            case ARG_IN.value:
                break;
            case ARG_OUT.value:
            case ARG_INOUT.value:
                Any any = nv.value();
                any.read_value(is, any.type());
                break;
            }
        }
    }
    catch ( org.omg.CORBA.Bounds ex ) {
        // Cannot happen since we only iterate till _arguments.count()
    }
}
 
Example 15
public void unmarshalReply(InputStream is)
{
    // First unmarshal the return value if it is not void
    if ( _result != null ) {
        Any returnAny = _result.value();
        TypeCode returnType = returnAny.type();
        if ( returnType.kind().value() != TCKind._tk_void )
            returnAny.read_value(is, returnType);
    }

    // Now unmarshal the out/inout args
    try {
        for ( int i=0; i<_arguments.count() ; i++) {
            NamedValue nv = _arguments.item(i);
            switch( nv.flags() ) {
            case ARG_IN.value:
                break;
            case ARG_OUT.value:
            case ARG_INOUT.value:
                Any any = nv.value();
                any.read_value(is, any.type());
                break;
            }
        }
    }
    catch ( org.omg.CORBA.Bounds ex ) {
        // Cannot happen since we only iterate till _arguments.count()
    }
}
 
Example 16
/**
 * Internal utility method to convert an NVList into a PI Parameter[]
 */
protected Parameter[] nvListToParameterArray( NVList parNVList ) {

    // _REVISIT_ This utility method should probably be doing a deep
    // copy so interceptor can't accidentally change the arguments.

    int count = parNVList.count();
    Parameter[] plist = new Parameter[count];
    try {
        for( int i = 0; i < count; i++ ) {
            Parameter p = new Parameter();
            plist[i] = p;
            NamedValue nv = parNVList.item( i );
            plist[i].argument = nv.value();
            // ParameterMode spec can be found in 99-10-07.pdf
            // Section:10.5.22
            // nv.flags spec can be found in 99-10-07.pdf
            // Section 7.1.1
            // nv.flags has ARG_IN as 1, ARG_OUT as 2 and ARG_INOUT as 3
            // To convert this into enum PARAM_IN, PARAM_OUT and
            // PARAM_INOUT the value is subtracted by 1.
            plist[i].mode = ParameterMode.from_int( nv.flags() - 1 );
        }
    } catch ( Exception e ) {
        throw wrapper.exceptionInArguments( e ) ;
    }

    return plist;
}
 
Example 17
public void unmarshalReply(InputStream is)
{
    // First unmarshal the return value if it is not void
    if ( _result != null ) {
        Any returnAny = _result.value();
        TypeCode returnType = returnAny.type();
        if ( returnType.kind().value() != TCKind._tk_void )
            returnAny.read_value(is, returnType);
    }

    // Now unmarshal the out/inout args
    try {
        for ( int i=0; i<_arguments.count() ; i++) {
            NamedValue nv = _arguments.item(i);
            switch( nv.flags() ) {
            case ARG_IN.value:
                break;
            case ARG_OUT.value:
            case ARG_INOUT.value:
                Any any = nv.value();
                any.read_value(is, any.type());
                break;
            }
        }
    }
    catch ( org.omg.CORBA.Bounds ex ) {
        // Cannot happen since we only iterate till _arguments.count()
    }
}
 
Example 18
/**
 * Internal utility method to convert an NVList into a PI Parameter[]
 */
protected Parameter[] nvListToParameterArray( NVList parNVList ) {

    // _REVISIT_ This utility method should probably be doing a deep
    // copy so interceptor can't accidentally change the arguments.

    int count = parNVList.count();
    Parameter[] plist = new Parameter[count];
    try {
        for( int i = 0; i < count; i++ ) {
            Parameter p = new Parameter();
            plist[i] = p;
            NamedValue nv = parNVList.item( i );
            plist[i].argument = nv.value();
            // ParameterMode spec can be found in 99-10-07.pdf
            // Section:10.5.22
            // nv.flags spec can be found in 99-10-07.pdf
            // Section 7.1.1
            // nv.flags has ARG_IN as 1, ARG_OUT as 2 and ARG_INOUT as 3
            // To convert this into enum PARAM_IN, PARAM_OUT and
            // PARAM_INOUT the value is subtracted by 1.
            plist[i].mode = ParameterMode.from_int( nv.flags() - 1 );
        }
    } catch ( Exception e ) {
        throw wrapper.exceptionInArguments( e ) ;
    }

    return plist;
}
 
Example 19
public void unmarshalReply(InputStream is)
{
    // First unmarshal the return value if it is not void
    if ( _result != null ) {
        Any returnAny = _result.value();
        TypeCode returnType = returnAny.type();
        if ( returnType.kind().value() != TCKind._tk_void )
            returnAny.read_value(is, returnType);
    }

    // Now unmarshal the out/inout args
    try {
        for ( int i=0; i<_arguments.count() ; i++) {
            NamedValue nv = _arguments.item(i);
            switch( nv.flags() ) {
            case ARG_IN.value:
                break;
            case ARG_OUT.value:
            case ARG_INOUT.value:
                Any any = nv.value();
                any.read_value(is, any.type());
                break;
            }
        }
    }
    catch ( org.omg.CORBA.Bounds ex ) {
        // Cannot happen since we only iterate till _arguments.count()
    }
}
 
Example 20
public void unmarshalReply(InputStream is)
{
    // First unmarshal the return value if it is not void
    if ( _result != null ) {
        Any returnAny = _result.value();
        TypeCode returnType = returnAny.type();
        if ( returnType.kind().value() != TCKind._tk_void )
            returnAny.read_value(is, returnType);
    }

    // Now unmarshal the out/inout args
    try {
        for ( int i=0; i<_arguments.count() ; i++) {
            NamedValue nv = _arguments.item(i);
            switch( nv.flags() ) {
            case ARG_IN.value:
                break;
            case ARG_OUT.value:
            case ARG_INOUT.value:
                Any any = nv.value();
                any.read_value(is, any.type());
                break;
            }
        }
    }
    catch ( org.omg.CORBA.Bounds ex ) {
        // Cannot happen since we only iterate till _arguments.count()
    }
}